Site hosted by Angelfire.com: Build your free website today!

Internal Hardware

Gudelines

Case

Preparing Components

Fitting the MotherBoard

Installing the CPU

Mounting the Cooler

Installing the RAM

Graphics, Sound and Network

Installing the Hard Disk

Connecting

PowerConnectors and Final Check

To External Hardware

Installing The CPU

Installing The CPU And Cooler
Lift the lever on the CPU socket.

Installing The CPU And Cooler
When the processor is in its socket, push the lever back down.

First, insert the CPU in its socket. To do this, raise the small lever at the side of the socket. If you examine the CPU from underneath, you will notice that there is a pin missing at one corner. Match this corner with the corner on the socket where there is a hole missing. The processor is keyed in this way to make sure it is inserted correctly. Please bear in mind that you should not force the CPU when inserting it! All pins should slide smoothly into the socket. If you are sure that you have positioned the CPU correctly (using the missing pin as reference), yet are unable to insert the CPU, it is likely that one of its pins is bent. If this has happened, straighten the pin using tweezers or a screwdriver. Once you have installed the processor, lock the lever back down.