Page 11

Troubleshooting Continued

The pump discharge is continuous or intermittent when the dock is supposed to be empty

1. Check hose connections for leaks. 

2. Check pump box for leaks.

3. Check flexible outer envelope for leaks. First check connection points for frame and matt then outlet.

4. Finally you may have to remove the dock for inspection and maintenance.

 Power Information

SeaPen DryDoc is powered by 12 volt DC only.

The SeaPen DryDoc may be powered from your boat battery using an extension cable. One end plugged into your boat 12 volt DC outlet, and the other end plugged into the DryDoc control box external power socket.

1. You may also use an OPTIONAL transformer for 240volt supply.

2. You may also use the OPTIONAL battery. See options.

3. You may also connect an OPTIONAL solar panel to the OPTIONAL battery. See options.

Warning:-

Never Connect Solar Panels to Control box without first connecting to a battery as the extra voltage will damage the Control box circuits

 Service

For further service and advice contact your local supplier

or directly at Marine Protection Services

17 Corang Cresent

Ferny Hills

Queensland 4055

Phone (07) 38510790

EMAIL seapen@ozemail.com.au

COPYRIGHT

This Manual is copyright. reproduction in whole or in part is expressly prohibited without written authority from the author

This manual is provided for information purposes only, All information included

herein is subject to change without notice. Seapen is not responsible for any

damages, direct or indirect, arising  from or related to use of this manual.

Previous Page    

© Sea Pen DryDoc                                           

Last updated   21 August, 2002