|
Product |
Features |
Use/Limitations |
Application |
|
TITEBOND
ORIGINAL |
·
Fast set -
shortens clamp time
·
Bonds stronger than
wood
·
Excellent heat and
solvent-resistance
·
Excellent
sandability
·
Unaffected by
finishes
·
Versatile - bonds
wood, hardboard, high pressure laminates and particleboard
·
Easy cleanup with
water |
Product is an
excellent choice for most wood projects intended for indoor use.
Product is not
intended for exterior use or where moisture is likely |
Application
Temperature
Above 50°F.
Assembly time
after glue application
5 minutes (70°F./50%RH)
Minimum required
spread 40
lbs. per 1,000 square feet
Required clamping
pressure Enough
to bring joints tightly together (generally, 100-150 psi for
softwoods, 125-175 psi for medium woods and 175-250 psi for
hardwoods)
Methods of
application Plastic
bottles for fine applications; glue may also be spread with a roller
spreader or brush.
Cleanup
Damp
cloth while glue is wet. Scrape off dried excess. |
|
|
|
TITEBOND
PREMIUM |
·
First one-part wood
glue to pass ANSI Type II water-resistance
·
Designed for
exterior use
·
Excellent
sandability
·
Unaffected by
finishes
·
Ideal for radio
frequency (R-F) and Hot Press gluing systems
·
FDA approved for
indirect food contact
·
Easy cleanup with
water |
Product is an excellent choice for most
wood projects intended for outdoor use or where moisture is present.
Test for adhesion.
Do not use for
joints below the waterline or continuous submersion. Do not use when
temperature, glue or materials are below 55°F. |
Application
temperature
Above 55°F.
Assembly time
after glue application 5
minutes (70°F./50%RH)
Minimum required
spread40
lbs. per 1,000 square feet
Required clamping
pressure Enough
to bring joints tightly together (generally, 100-150 psi for
softwoods, 125-175 psi for medium woods and 175-250 psi for
hardwoods)
Methods of
application Plastic
bottles for fine applications; glue may also be spread with a roller
spreader or brush.
Cleanup
Damp
cloth while glue is wet. Scrape off dried excess. |
|
|
|
TITEBOND LIQUID
HIDE |
·
Ready-to-use form
·
Moderate speed of
set
·
Excellent
sandability
·
Unaffected by
finishes
·
Excellent
creep-resistance
·
Can be used to
create a "crackling effect" on wood |
Titebond Liquid Hide
Glue is not intended for exterior use or where moisture is likely. |
Application
temperature
Above 50°F.
Assembly time
after glue application
10 minutes (70°F./50% RH)
Minimum required
spread 40
lbs. per 1,000 square feet
Required clamping
pressure Enough
to bring joints tightly together (generally, 100-150 psi for
softwoods, 125-175 psi for medium woods and 175-250 psi for
hardwoods)
Methods of
application Can
be applied by roller or dip spreader, pressurized oil cans, plastic
applicators, brush or stick.
Cleanup
Damp
cloth while glue is wet. Scrape off dried excess. |
|
|
|
TITEBOND WOOD
MOULDING GLUE |
·
Versatile - bonds
most porous and semi-porous materials
·
Extra-thick formula
helps fill small cracks and gaps
·
No-runs, no-drips
·
Strong initial tack
·
Unaffected by
finishes
·
Excellent
sandability
·
Easy cleanup with
water
·
Nonflammable - no
offensive odor |
Titebond Wood
Molding Glue is not intended for exterior use or where moisture is
likely. |
Application
temperature
Above 55°F.
Assembly time
after glue application
3-5 minutes (70°F./50%RH)
Minimum required
spread40
lbs. per 1,000 square feet
Required clamping
pressure
Enough to bring joints tightly together (generally,100-150 psi for
softwoods,125-175 psi for medium woods and 175-250 psi for
hardwoods)
Methods of
application Plastic
bottles for fine applications; glue may also be spread with a roller
spreader or brush.
Cleanup
Damp
cloth while glue is wet. Scrape off dried excess. |
