Ok, we should now have our Forks and rockers made to the length we know will work with our head height we determined we wanted. Time to make our Triple Trees. This photo shows how I used to make mine. Using 6" wide plate steel, I'd make muself a template with a piece of paper with centers for the 3 holes I'd need. One for the stem bolt and 2 for the forks. Needless to say, its a lot of work to cut this 1/2" thick plate and there is a lot of cutting and shaping to do. I now ask the shop where I buy my steel to sheer my trees for me. Of course you need to know what size you need. But if your cutting your own, this will be the way to start. Once you have it laied out you can cut them and shape them to your desired look. I don't get crazy with that simply because its a lot of work to get fancy with this stuff. If you want and can spend the money, you can have your trees laser cut or water cut if you have a shop in your area that can do that.