| Snake Eyes |
|
Irons Woods Wedges Putters |
| Golfsmith |
|
Irons Woods Wedges |
| Dynacraft |
|
Irons Woods Putters |
| Spalding |
|
Irons Woods |
| Killer Bee |
|
Irons Woods |
| Harvey Penick |
|
Irons Woods |
| T Knocker |
|
Irons Woods Titanium |
|
| Better Golf |
|
Golf Tips Club Fitting Putter Fitting Swing Exam Handicapper |
| Information |
|
Sensicore Spine Align Custom Fitting Freq Match Freq Flex Weight Sort Club Facts 1 Club Facts 2 Club Terms Dictionary FAQ's |
| Humor |
|
Jokes Excuses |
| About TKG |
|
Policies Guarantee Testimonials TKG Banner About Me |
| Free Golf Tip |
|
To receive a free golf tip every week. Enter E-mail |
"Build Your Own Golf Clubs"
If you like this golf club head:
1..
Write down it's "Cost" and "Part Number"
2..
Then click on one of the "Golf Shaft Options"
below.
3..
Follow the instructions for the "Total Cost".
SNAKE EYES DC-01 UNDERCUT
Snake Eyes DC-01 iron heads feature a deep cavity that is undercut for maximum forgiveness and total game improvement. The innovative undercut design pulls weight back from the face which improves launch angles -- especially in the long and middle irons.
431 Stainless Steel
5-Iron Toe Height: 57.5mm
5-Iron Blade Length: 85mm
Vertical CG(5-Iron): 20mm
Grooves: Square
To see how it works ?
Go Here
Trajectory
Forgiveness
Workability
Available Right Hand Only
| PART NUMBER | COST PER HEAD |
| SE2800 | $16.95 |
| GOLF SHAFT OPTIONS | |
| Steel Shafts.... Go Here | |
| Graphite Shafts.... Go Here | |
Matching Woods... None
| IRON | LOFT | LIE | WEIGHT | OFFSET |
| 2 | 18° | 58.5° | 233g | 6° |
| 3 | 22° | 58° | 240g | 6° |
| 4 | 24° | 59.5° | 247g | 5° |
| 5 | 27° | 60° | 254g | 4° |
| 6 | 30.5° | 61° | 261g | 4° |
| 7 | 34° | 62° | 268g | 4° |
| 8 | 28° | 63° | 275g | 3° |
| 9 | 42° | 64° | 282g | 3° |
| PW | 46° | 64° | 289g | 3° |
| SW | 53° | 64° | 300g | 3° |
| LW | 58° | 64° | 295g | 3° |