| Snake Eyes |
|
Irons Woods Wedges Putters |
| Golfsmith |
|
Irons Woods Wedges |
| Dynacraft |
|
Irons Woods Putters |
| Spalding |
|
Irons Woods |
| Killer Bee |
|
Irons Woods |
| Harvey Penick |
|
Irons Woods |
| T Knocker |
|
Irons Woods Titanium |
|
| Better Golf |
|
Golf Tips Club Fitting Putter Fitting Swing Exam Handicapper |
| Information |
|
Sensicore Spine Align Custom Fitting Freq Match Freq Flex Weight Sort Club Facts 1 Club Facts 2 Club Terms Dictionary FAQ's |
| Humor |
|
Jokes Excuses |
| About TKG |
|
Policies Guarantee Testimonials TKG Banner About Me |
| Free Golf Tip |
|
To receive a free golf tip every week. Enter E-mail |
"Build Your Own Golf Clubs"
If you like this golf club head:
1..
Write down it's "Cost" and "Part Number"
2..
Then click on one of the "Golf Shaft Options"
below.
3..
Follow the instructions for the "Total Cost".
SNAKE EYES FMC-1
FMC-1 iron heads are both investment cast and then forged, creating the soft, solid feeling players enjoy from a forged head. But at the same time, the head's retain the accuracy of casting which allows for the remarkable forgiveness from what otherwise appears to be a performance iron intended only for better players.
MUSCLE CAVITY DESIGN
• New FMC-1 iron heads feature a "Muscle/Cavity" design that offers the look and setup of a traditional blade, but utilizes a channel cavity to retain surprising forgiveness compared to traditional designs.
• The muscle back design places mass behind the ball - much like a traditional blade - for a very solid feel at impact. The channel cavity allows for additional perimeter weighting that helps accommodate off-center shots. The thin topline sets up like a blade to provide the pleasing appearance at address many better players enjoy.
CAST AND FORGED - THE BEST OF BOTH WORLDS
• A unique investment forged process offers both the precision of investment casting with the feel advantages of forging to produce a very accurate, soft yet solid feeling set of irons. The process starts by investment casting the initial head shape from soft 8620 carbon steel. The head is then forged in a hydraulic forging press compacting the face material 150 kg/cm2 to align the grain structure and eliminate voids. Finally, the face is skim milled to ensure flatness, and the scorelines are CNC milled for accuracy.
• By investment casting the first stage of the irons, some of the costs associated with complete forgings are averted allowing the FMC-1 heads to offer the performance and feel of a forged club without the heavy price tag.
To see how it works ?
Go Here
Trajectory
Forgiveness
Workability
Available Right & Left Handed
2 Iron - right hand only
| PART NUMBER | COST PER HEAD |
| SE2558 | $28.50 |
| GOLF SHAFT OPTIONS | |
| Steel Shafts.... Go Here | |
| Graphite Shafts.... Go Here | |
Matching Woods... None
| IRON | LOFT | LIE | WEIGHT | OFFSET |
| 2 | 18° | 58.5° | 234g | 5° |
| 3 | 21° | 59° | 241g | 5° |
| 4 | 24° | 59.5° | 247g | 5° |
| 5 | 27° | 60° | 253g | 4.5° |
| 6 | 30.5° | 61° | 260g | 4° |
| 7 | 34° | 62° | 267g | 4° |
| 8 | 38° | 63° | 275g | 3.5° |
| 9 | 42° | 64° | 282g | 3° |
| PW | 46° | 64° | 289g | 3° |
| SW | 53° | 64° | 300g | 3° |
| LW | 58° | 64° | 300g | 3° |