The add/brochure page


Recycled steel products.
Scrap steel bought and sold.



Decorative steel.
forge and anvil tools. Blacksmith Supplies
Reshaped tools--
Jack hammer and kanga bits.
Crow bars.
Concreters spikes/pegs.
Jimmy bars/pry bars.
Blacksmith Chisels.
Forge repairs, Gas, Charcoal, Coke




Hand forged table base

14/02/2009 Hand Made, Leather Hair Ties and beading for the bike...or not the bike.
and we can Import clips and exotic beads for orders.











Trivots



Pot Bellies


i am bringing out a line of benders shortly, these start at the quite capable "hobby".
they are similar to the hossfeld type bender and are while limited in the size of steel that fits in the bender,
almost unlimited in capability for its size.
Hobby, is a 40mm by 6mm frame with 7/16 holes. it is sold frame only with 3 bolts as pins and 3 sleeves.
from there you can make your own dies (and I am happy to show you how,) or order from me, simple dies.
the warranty is simple, if you break it, use the blocks, or, you need the bigger one.
the Hobby can bend 50mm flat by 5mm to a sharp 90 degree bend, and when setting this up, too sharp it begins to tear the
steel on the out bend. if you want to bend something too big, throw it in the forge and use the blocks.
the sleeves are hand made here and are replacable as are pins. ive made it so the hobby person can bend at least 12mm
solid square or round without blocks. Services include general forging and weld fab
Band saw, Power Hacksaw, 40 and 80 amp plasma cut, 50 ton Hyd press,
cold bar twist to 25mm square.
Enerpac sp35 35ton punch to 13/16 in half inch
Enerpac WHC 1250 Hydraulic Cutting Head
Oxy, Mig- Ally s/s & steel, Dc Tig- S/Steel, copper, etc
Air hammer.
We also sell Charcoal for the forge from eagle farm

Our email.. leather_and_steel@ymail.com