|
|
|
This tutorial will guide you through the steps of changing the door handles of your 206. This will enable you to change your current handles to the ones used on the S16 model. You'll need to go to your favorite dealer and ask for 2 S16 door handles (make sure you buy one for the left and one for the right door), they'll cost you around 11$ each.
1. Insert a small screwdriver and remove the plastic covering the door handles.
2. You'll need to remove the door cover, once you do that, you'll see something like:
3. Once the door cover is removed hold the handle and slide it parallel to the door, in an outward direction. Once the handle is released you can pull it out as shown in the figure below.
4. Completely remove the handle and replace it with the model you just bought. Put the handle back in the door and slide it back, securing it in its position.
5. Make sure the handle works properly, then reinstall the door cover... Good job, enjoy! :)
|
|
|
