C.B.T. has worked with many professionals in the mud racing, drag racing and rock crawling industry. Being a racer himself, he realized the need for quality built easy to use tools.

***Cylinder Head Plugs***

Down nozzle fuel rail head plugs – Use to fill in the hole created when you remove the down nozzle fuel rails from cylinder heads. Unlike the brass plugs now sold these utilize the same threaded hole that held the fuel rails in so these plugs won’t fall out like the brass ones do.

$60.00 set of four

***Leak Down Tester***

I like single gauge testers and when I started back racing I couldn’t find a good one. I contacted the original designer of the gauge (Childs and Albert) formerly sold. My gauge is very similar and accurate.

$150.00

***Leak Down Calibration Tool***

Screw an 80 pill into this holder and check the accuracy of your leak down tester.

$15.00

(Also Available: Cheaper leak down calibration tool – brass cap with hole drilled in it the same size as an 80 pill. $7.50)

***Clutch Cooler***

- Designed to fit into clutch can inspection plate
- Comes with high capacity 6” reinforced hose
- Durable fabricated Aluminum hose ends
- Hose removes from fan for easy storage in trailer.

$250.00

***Motor Stand***

- Made to fit motors mounted on motor plates
- Built from sturdy materials and heavy duty casters
- Motor and stand can be removed from roll around base and placed directly on floor
- Motor stand allows user to easily move “Ready To Run” motors around shop or in & out of trailer
- Call us if you have a unique motor configuration and need a custom motor stand.

***Valve Train Tray***

- Built from aluminum
- Holds push rods in order of removal, rocker arm assembly, valve lash caps, nuts or studs for one side of motor
- TIG welded construction for durability
- Completely sealed so oil does not leak out

***Hero Card Holder***

Holds 8” X 10’ hand outs. Lid flips up to hold display card. You don’t have to use your tools for paper weights.

$75.00

***Push Rod Checker***

Put this attachment on a 12” caliper and you can accurately check the “effective length of a push rod”. The distance from the bottom of the cup to the tip.

***Main Bearing Press***

The main caps on todays hemi blocks fit extremely tight. You have to hammer them into place and when you do the bearing will fall out. This press fits on the pan rail and gently press the main caps in to place.

$125.00

***Steel #20 & # 16 stub wrenches***

Aluminum AN wrenches are great but they flare out when trying to tighten oil lines. These low profile steel wrenches allow you to tighten those also important lines.

$15.00

***Height tool to set .702***

You use a depth gauge to set a pedal clutch. This part is used to set that gauge.

$10.00

***Sleeve for clutch adjuster tool***

The wrenches used to turn the adjusters on a clutch wallow out the holes in the barrel adjuster. This prevents that from happening.

$20.00

***Funny Car Tool Tray***

More compact that a Pit Pal tray but cares more tools for the same price

$350.00

Custom Built Tools
Edgewood, Texas
(903) 880-9000