Mercenaries of Pain Armpatches
To create an armpatch, you need only two simple programs:
A graphics editing program (Photoshop, Paintshop, etc)
A file conversion program (provided below)
The first thing you have to do is create the image. Now, here are
my suggestions: the image should be perfectly square and I recommend
making a 120x120 pixel canvas size, which will give you a good size
canvas to work with. Place whatever you want inside the context
of the image and when you are finished, resize the image to 32x32
pixels (this is a necessary step). Make sure to have your image
created using the RGB color palette (or convert it to RGB if you
have to). After creating your image, resize it to 32x32 pixels and
save your image. Save your image as a bitmap (*.BMP)!!
Now you have to convert your image to the standard Rogue Spear
image file, the RSB file. To do this download the following utility:
Download Now [10 kb]
NOTE: your pictures must be 24 bit in order to be converted to
RSB. Now run this program and convert your file to an RSB file type.
The program is self explanatory. If you have not skipped any steps,
or added any new ones for that matter, you should receive nothing
but a new *.RSB file. Now copy this file to your RS\data\armpatch
directory. All you have to do now is configure Rogue Spear to use
your armpatch.
Installing Your Armpatch
Installing your armpatch, and configuring it is straight forward.
Place your armpatch in the RS\data\armpatch directory. Make sure
that is has a name of the following format: armpatchX.rsb where
X is a number ranging from 1 to 20 (ie. armpatch17.rsb or armpatch2.rsb).
Rogue Spear can only handle 20 armpatches in the armpatch directory
at once, but keep in mind that there is no conflict with overwriting
the default armpatches. Those can be deleted and overwritten anytime.
Now that your armpatch is in the armpatches directory and file
is named correctly you have to configure your armpatch from within
Rogue Spear. Start up Rogue Spear, and then click on the Options
button. Then proceed to click on the MP Game button. At this menu,
make sure that armpatches are enabled by checking the armpatch box.
Then you can cycle through all the armpatches in your armpatch directory
by hitting the forward and back buttons located on either side of
the armpatch depicted. That's it, you're finished.
NOTE: If your armpatch does not appear when you cycle throught
the available armpatches the armpatch file is either not present
in the Rogue Spear\data\armpatch directory, or it is named incorrectly.
more to come!
|
Page Updated:
14 November, 2001 07:34 PM
Best viewed by 1024x768 16bit colors
|
|