All PHASE ADDERS, PHASE SPLITTERS, and POWER INTERRUPTERS are warranted to purchasers for resale or use in business for 1 year from the date of purchase from EYLANDER ELECTRIC. For users who purchase equipment that takes a period of time for the installation, a copy of the invoice, with date of purchase, together with the returned warranty, dated and signed by the Electrical Inspector or a representative of the serving utility as to their acceptance of the installation, will be sufficient for an extension of warranty. The maximum length of warranty shall be 18 months from date of purchase.


LIMITATION OF WARRANTY

Any part that is determined by EYLANDER ELECTRIC to be defective in material or workmanship and is returned to us, shipping costs prepaid by the sender, will be repaired or replaced as the exclusive remedy at our option. If the converter was purchased from an electrical distributor or machinery dealer, then the end user must apply for warranty at the source of purchase. The maximum amount of the warranty is the amount paid for the converter.

Spikes are not uncommon when phase converters are used to manufacture the 3rd leg for three phases; however, there are many spikes coming from the utility power and no utility will claim to have clean power.

Whenever electronic equipment, computers, process control equipment, etc., are going to be used in the building, a power conditioner or surge suppresser should be installed at the service, or else a U.P.S. system should be ahead of any critical equipment.


ADDITIONAL PARTS WARRANTY

There is an additional 5-year warranty on all run capacitors and a 5-year warranty on the motors that we use for rotors. We use rotors built by LINCOLN ELECTRIC because they provide the best phase balance for our formula for building our PHASE ADDERS.


CONVERTERS MUST BE SIZED ACCORDING TO LOAD

The S and SB PHASE SPLITTER models are built for single-motor operation only. They are not to be connected to a larger or smaller motor than the nameplate rating. If they are hooked up to a smaller motor, it will destroy the windings; if they are hooked up to a larger motor, then the motor will lack power to start and pull the load. No converter should have more than 20 starts per hour.

Eylander Electric disclaims any IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Also, the PHASE ADDER rotary converters are to be sized according to load to ensure proper performance of motors.

LIGHT START DUTY: Yields maximum 80% of HP load

REGULAR START DUTY: Yields maximum 90% of HP load

HEAVY START DUTY: Yields maximum 100% of HP load

MOTORS ABOVE CODE LETTER F: Use one size larger than heavy-duty rating

CNC machines should have their own converters sized EXTRA HIGH TORQUE.

Hydraulic presses, paper cutters, deep well pumps, heat pumps, or any other load that may have a hard start on full load—in order to get the service factor rating of the motor, you should use the heavy start duty rating. For foreign-made equipment that uses DIRECT DRIVE in the higher speed ranges, air compressors, or dead weight start hoists, use the EXTRA HIGH TORQUE formula.

  SPECIAL PARTS REPLACEMENT PROGRAM

All parts used in the Phase Converters should be available from a local electrical supply company. We use all STANDARD NAME PARTS in our converters. After the warranty period, if you are unable to obtain the parts locally, then as a service we will ship the parts UPS NEXT DAY AIR RED LABEL and you will have the parts within 24 hours.