| Snake Eyes |
|
Irons Woods Wedges Putters |
| Golfsmith |
|
Irons Woods Wedges |
| Dynacraft |
|
Irons Woods Putters |
| Spalding |
|
Irons Woods |
| Killer Bee |
|
Irons Woods |
| Harvey Penick |
|
Irons Woods |
| T Knocker |
|
Irons Woods Titanium |
|
| Better Golf |
|
Golf Tips Club Fitting Putter Fitting Swing Exam Handicapper |
| Information |
|
Sensicore Spine Align Custom Fitting Freq Match Freq Flex Weight Sort Club Facts 1 Club Facts 2 Club Terms Dictionary FAQ's |
| Humor |
|
Jokes Excuses |
| About TKG |
|
Policies Guarantee Testimonials TKG Banner About Me |
| Free Golf Tip |
|
To receive a free golf tip every week. Enter E-mail |
"Build Your Own Golf Clubs"
If you like this golf club head:
1..
Write down it's "Cost" and "Part Number"
2..
Then click on one of the "Golf Shaft Options"
below.
3..
Follow the instructions for the "Total Cost".
SPALDING BLACK HAWK
The unique cavity weighting of the Spalding Custom Black Hawk iron heads offers a band of support throughout the lower half of the face. This support system provides solid feel not only for on-center shots, but is also exceptionally solid and forgiving on off-center shots.
The specially designed weighting system in the cavity provides two known contributors to solid feel from an iron head: added weight low along the sole and weight pulled back from the face.
Pulling weight back from the face also improves launch angle by shifting the center of gravity back, thus increasing the dynamic loft of the iron head.
The cavity weighting also places increased thickness low in the toe and heel extremeties for added forgiveness on off-center shots.
A special laser-cut Black Hawk medallion is positioned directly behind the impact zone in the "power oval" of mass that offers exceptionally solid feel on on-center shots.
To see how it works ?
Go Here
Trajectory
Forgiveness
Workability
Available Right Only
| PART NUMBER | COST PER HEAD |
| SP2700 | $15.95 |
| GOLF SHAFT OPTIONS | |
| Steel Shafts.... Go Here | |
| Graphite Shafts.... Go Here | |
Matching Woods...
Go Here
| NO. | LOFT | LIE | WEIGHT | OFFSET |
| 3 | 21° | 59° | 240 gr | 6.0 mm |
| 4 | 24° | 60° | 247 gr | 6.0 mm |
| 5 | 27° | 61° | 254 gr | 6 mm |
| 6 | 31° | 62° | 261 gr | 5.0 mm |
| 7 | 35° | 63° | 268 gr | 5.0 mm |
| 8 | 39° | 64° | 275 gr | 4.0 mm |
| 9 | 43° | 65° | 282 gr | 4.0 mm |
| PW | 47° | 65° | 288 gr | 3.5 mm |
| AW | 51° | 65.5° | 292 gr | 3.5 mm |
| SW | 55° | 65.5° | 292 gr | 3.5 mm |
| LW | 59° | 65.5° | 295 gr | 13.5 mm |