Here is the list of parts
Step 1: Collect all the parts nessecary to build the project. Step 2: Take all parts and take note of there sizes so you can start building the circuit board. Step 3: Design the circuit board. Step 4: Now all the parts can be soldered into place on the board. Step 5: If you wish, you can buy a box at Radio Shack to mount the board and controls on.
Things can be added to the project in place of some parts to add some unusual effects. In place of the potentiometers, photo cells can be added. These are light sensitive resistors. Once in place you can move your hand over it and cause the pitch to change. Then turn out the lights and try it!
|
|
| Back to Home |
|
