NERF SuperMaxx5000:
Not a lot of people have this gun, and it is a real shame, so it's coming first! There! It is easy. If you are anything like me, you can just throw away the dart and ball barrel, they are a waste of time. Then take an awl, and poke a hole in the thing that you stick the extra barrels on. That will make for a good sight in which to line up your target. Then saw off the air restrictor on the front of the arrow barrel. Now take the awl and jab at the air restrictor in the front of the gun. Now people will fear you when you have this gun!
Expand a Blast:
This gun sucks otherwise so you might as well do it. Just take plyer and rip out the little larami/air restrictor in the barrel. Then tape up the holes in the barrel, and put a tourniquet (One of those elastic things that the doctor puts on your arm when you get blood taken) from the from to the plunger. Never expand it.
Lock 'n Load
Unscrew the yellow top part of the gun (that cocks). Put a key ring there to make it easier to cock. Now saw off whatever orange is left on the barrel. Pull out air/larami restrictor. That improves so much it isn't funny.
Razor Fin
Everybody hates this gun. So again, I'll try to make them change their mind. Pull out air/larami restrictors with plyers. Do the tourniquet thing. Do Not Leave Cocked! I am working on another, but it is in the VERY loose stages, not sure if it will ever be here.
Any Chaingun
Take a drill and look at the chain. Look at how small the hole is in the chain. Increase hole size to the exact size of the dart.
All NERF SuperMaxx Guns (Except Disc Shooter)
I figured this out and then saw that other people already knew about it and said, "Ahhhhhhhh!!!". Just take a thick piece of paper (I've heard you can use a broken Mad Hornet barrel) and roll it up into a surpressor type thing that fits into the barrel. It will push down the necassary switches in order for air to come out. Now you can shoot anything that you can shove down the barrel.
Secret Shot
There is another mod for this gun, but I am not quite sure what is is yet. I will get it here later. Just take a pair of toenail clippers and cut off that little air restictor in the barrel. That makes it more powerful. Just don't do the turnicate or rubberband method on this (or any riprocket gun) or you will blow a hole through your ammo.
Secret Shot II
Take that awl out again, and start poking at the air/larami restictor (starting to hate those by now?) in the second barrel. Then take needlenose plyer and yank out the one in the main barrel. This gun will majorly rock.
Bow 'n Arrow
You probably already know about this one. Just saw off the first half inch off the barrel. Then tie tourniquets from the handle to the front. Take off silly (see that word a lot on the net with bow 'n arrown don't you) bow things. This is now a majorly powerful death machine.
Big Bad Bow
This one has to be the easiest one here. Just take a screwdriver and pry of the air restrictor in the barrel. Then smooth out the inside of the barrel to make in first whatever you feel like shoving down there.
Sharpshooter II
People say to buy another gun and make it so the one gun has two bottom (more powerful) barrels. This is stupid. There are two differences between the top and bottom barrel. The top has a hole in it and it is longer. So saw the top one to the same size, and tape up the hole. Duh! Also, the spring on this gun never fully compresses, so take a jigsaw and saw a pice of wood to fit at the base or the spring. That is hard but works very well. Stretch the spring. Drill the air hole in the barrel to the exact size of the dart. Close up, and put a tourniquet on. While you are inside, you can also take out the green barrel changer and put duct tape there to seal the path from plunger to barrel, and this will make it shoot two at once. Some people like that, but that isn't to useful for me.
Perceptor
I got this from someone else's page. It is pretty entertaining actually. First, place the "gun" on a hard surface (sidewalk comes to mind). Now jump on it vigoriously. Now use the pieces to throw at you opponents. Another good method is to put on a rail road track. Leave it there. Forever. hehehe...
Crossbow
The Crossbow is okay unmodified, but modified it is a sniper machine. To do this, open up the Crossbow. The Crossbow is simple inside and is easy to put back together. There is a long yellow tube that connects the air chamber to the ammo chamber. Disconnect the tube from both the ammo chamber and the air chamber. Remove the spring from inside the tube. The spring was only there to keep the tube from kinking. This long tube means the air has to travel farther to fire the ammo. This problem can be corrected by cutting the tube and leaving about an inch of tube connecting the two chambers. Now the barrel will come out of the hole in the very front of the gun. While your Crossbow is open you might as well streach the spring. After the Crossbow is ready, put the case back together. There are some small holes in the undersideof the barrell. Tape over these. If you want to, loop a rubber band through theeye of the cocker and loop it where the ammo chamber used to protrude from. Now the Crossbow is a much better weapon.
I got this modification from NERF Planet. Hey, I'm giving them credit.
Defender T3 Arrow Gun
This one is a no-brainer. Saw off the first one half of an inch of the barrel. You're an idiot if you didn't know that one.
Tornado
There is a whole buch of crap in the front. Take it off. This will making loading less cumbersome and make it much more useable. Update: To get the Clear purple part off of the gun you have to unscrew it, don't worry because this gun is impossible to break. Teaking this off reduces jamming, and makes the rate of fire go up.
NERF Supermaxx 3000
This is the same idea as the 1500 mod, but a little more difficult to perform. Open the gun, the gun is complicated, but unlike cocking guns there is little tension with spring to make it difficult to put back together. Focus mainly on the eight barrels for now. Take off the orange cover that covers the barrels, this will let you take the barrels out (this is difficult because they are glued-try prying them out with a screw driver). Clear out all the things blocked the path of the air, and put the barrels back on. Now go in the back of the gun towards the trigger mechanism. If you are tired of those tight, not-very-reliable triggers of the old, take out that black "switch" thing on the metal bar. That was to make the little ring on the pressure reliever push forward so it would shoot. Just put some tape there to fatten that up so it relieves the pressure anyway. I seriously see this as a major flaw in the guns design, and i cannot understand why anyone would do that. But anyway, just put it pack together, and you have a more reliable and much more powerful weapon.
NERF Supermaxx 3000 (New Version)
Exact same idea as many riprocket guns, just go to each barrel and cut of the bar on the air tube that restricts air. Like SecretShot, but takes eight times the amount of time. I don't know, but i'm willing to bet using the new riprockets would help a ton as well.
Mega Darts
This is one of my favorite modifications. First, coat the dart with packaging tape. This will make it smoother so that it leaving that barrel faster. Then stick a pencil in the whole, make sure the pencil is fatter than the hole. This makes the hole bigger like the original Type 1 darts. Now, you cut off the suction cup (not the hole top) to make it moke aerodynamic. This ammo hurts a lot more and goes a lot farther. (all but the cut off the suction cup part works well in some guns, but not all, make one and try it out with your guns to see)
Larami Dart
The Death dart Mod. This is a beautiful mod take can actually put a small dent in you wall (it did to mine). You have two options from here. One is to make you darts the same but the will go farther and won't blow in the wind. Two is to make your darts the good kind and leave large gaping holes in you opponents. The difference is in the last step. First, take off the tip. Now look where the hole is that the tip went into, stick a whole bunch of Duco Cement in there and stick BB's or Screws, or any kind of small metal pieces. Here is the difference. You can put the tip on, or you can leave it off. The problem with leaving it off is sometimes when the dart hits something it jams forward and does a litte too much damage.
NERF 250
This gun is incredibly weak unmodified, and is about as powerful as a Monoblast when modified, so just modify it because it is really easy ok? Look at the prongs in which you put the darts on. They have the same air restrictors that the SecretShot uses, just cut those off. Then notice the back of the prong is thicker, so file that down so the whole thing is the same. Now cover the prong with packaging tape so that the dart slides off faster.
Razorbeast
This is definetly a beast! And it is also very hard to use. First of all, that grey thing that can go an the top is just to make it look cool, and it always falls off. You might as well just throw it away. the next thing you want to do is use the new black chains on it instead of the old grey ones. This improves performance alot. Now the main mod is to silence the gun. This thing is way to loud! The gun may be big, but there is alot of wasted space. All you have to do is take apart the gun and put an old tee-shirt inside all the spaces. Practically anything will stop the majority of the sound. Another really good idea is to attach a belt to the handled at the top so you have a shoulder strap. When you are done with the gun, drop it and grab a sidearm. The razorbeast will just hang until you use it again. Another tip: Using Larami darts will improve the range by about 10 feet. ummm, i got this from one of those sites out there.
Ripsaw
Turn this peice of crap into a fully auto ballgun. Now, look in the tube that you stick the balls in. Ok, that was easy. Now there should be a small gray tab keeps the balls from falling down to be shot. Cut that off. Now find a really big tube that can hold a lot of balls. Duct tape that to the top so that you can hold a lot more balls. Now this thing you be fully auto machne gun.
CO2 Powered Supermaxx 5000
I did not actually do this, and I'm not sure if it will work or not, but if it would, it would seriously rock. Try to cut one side out of the side of your orange "air tank." Don't obliverate it doing it because you will need it. Inside there should be a white stupid looking thing which is the real airtank. Replace the real tank with a real CO2 tank and put hinges and like a lock type of a thing on where you cut out the side. Now when you run out of CO2 you just open the little door, pop a new tank in, close the door and get ready to rock. This would also make the gun semi-automatic, except for the fact that you have to put a new dart in after each shot. I don't know if it would work or not, but if anyone successfully dooes this mod, drop me a line, because I'm going to try it. I would expect like over 100 feet from this, and faster reload time. You'd truly be unstoppable.
Supermaxx 1500
I have finally located a mod by opening this gun up and looking. There is a way to do it without opening the gun, but it is actually easier to take it apart. Don't worry anyway, the gun is extremely easy to put back together. Because of all those reason i am going to cover the version that involves taking it apart. So...take it apart, then unhook the for barrels from the rest of the gun, as this is the only part you need to worry about. There are two screws at the bottom of the four barrel (the part that is usually in the gun). Remove them. See the black cover going over the four barrels? Just slide it off, but keep it because you will need it later. Then insert a screwdriver into each one of the four barrels and pop out the frot part. That right there makes it shoot any kind of ammo. Then use any method nessacary to get the rest of the air restrictors out. Then glue the barrels back into their place because after being taken apart they won't fit in well anymore. Slide the black thing back over the barrels to secure them, and put the whole thing back together. On my distance check i got a 55 feet and a 50 feet (ONCE...I got 75 but don't expect it to perform like this all the time). Mine is not done all that well because i did it with no reference off the internet. Your's will probably turn out better. There is a downside though...because there is nothing to keep your dart in the barrel you can't use the regualar old Laramis. You have to use the thick ones that come with NSM 3000 and NSM 5000 or any pre-nerf supermaxx gun. You can also use regular dart, which shoot pretty well. Anyway, it isn't that big of a deal anyway, because the thin Larami's suck.
Mad Hornet
I heard this simple task make the horrible range on this great, but that is only a "heard" cuz I never actually touched this gun. Here it is: Open the gun, and if you suck at taking it apart, don't worry because it is easy to put back together. Then take out the barrels part and put scotch tape over each one of the holes to make the barrels more air tight. Put back together. It is that simple. Range is supposedly comparable to other guns that get really good range, but i can't say that for sure yet.
Triple Strike
Take a Screw Driver and jab at the air restrictors in the front of all three barrels. While range is not improved too much, it does improve slightly. You can now also use Riprockets as ammo, which flys so much faster than the arrow and is harder to dodge. If you do not like the sound of the whistles, tape up the holes in the front of the arrow.
