[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [PROTEL EDA USERS]: Via Funnel hole separation (was Copy & paste within PCB P99SE with NETS please.)
Heiko Vachek wrote:
>
> 2. Have you ever seen such an intelligent Autorouter?
> BTW: if you want planes on other layers not to be cut by this
> zig-zag row of vias, just separate the two virtual lines where
> the vias are put on by another 20 mil. So a plane will flow
>around and between the vias.
Also, no traces on other layers can be routed between these zigzagged
vias, but by separating them (per Heiko) you open up a routing channel
between the vias. Of course if there are no other signals that need to
be routed in this area ...
David W. Gulley
Destiny Designs
