1. If oil is below full ______________________
2. Apply thin film of oil (DO NOT USE GREASE) to filter gasket ______________________
3. Replace drain plug with wrench/socket ______________________
4. Place oil drain pan under oil pan drain plug ______________________
5. Drive vehicle forward onto ramps ______________________
6. Clean mounting base and be sure old gasket is removed from mounting base ______________________
7. Place wheel chock behind rear wheel ______________________
8. Where do you find the proper oil grade and how many quarts are required? ______________________
9. Tighten new filter 3/4-1 turn by hand after gasket contacts base______________________
10. Place funnel into oil fill opening ______________________After completing the task click on the Quiz link to continue.
Site Directory
Syllabus
Objectives
Steps
Quiz
Course Evaluation