fanda QUICK TAKE OFF CHECKLIST

Panel Access: 
SHFT+2 - OH (Overhead)
SHFT+3 - Quadrant
SHFT+4 - Steering
SHFT+6 - Anti-skid

SETTINGS
1.) Fuel shutoff OFF location: Quadrant SHFT+3
2.) Main power ON location: OH top left (Overhead)
3.) All DC Controls ON (same as item 2.)
4.) AC inverters ON location OH top right 
5.) AC generators ON location OH top right 

ENGINE START
1.) Confirm items 1. thru 5. (above) are completed
2.) Start engine #2 first using Ignition-M and Select #2
3.) Open fuel to engine #2 (click hotspot

STEERING and ANTI-SKID 
SHFT+4 - Steering All ON
SHFT+6 - Anti-skid All ON

TAXI
1.) Brake set ON (CTRL+. [period])
2.) Condition Levers (props) MINimum CTRL+F1 (hear that sound!)
3.) Release brakes and slowly open throttles)
4.) Use rudder steering and left/right brakes (F11 F12) to turn
5.) Control taxi speed using brakes (not throttle)

TAKE OFF
1.) Throttle Lock OFF location Quad position SHFT+3 (find hotspot)
2.) Condition Levers  keyboard CTRL+F4 (Quadrant position SHFT+3) 
3.) Open throttle to Take-off Power (not full throttle) using joystick

CLIMB OUT
1.) Rotate at 100 KIAS (Knots Indicated Air Speed)
2.) Gear then flap UP (once constant rate-of-climb established)
3.) Pull prop back to 1050 using CTRL+F2
4.) Pull throttle back to TRQ 80% (3 & 4 are backwards but easier for the novice)
4.) Climb at between 130-160 KIAS

CRUISE
1.) Click the autopilot ON (AP top righthand)
2.) Click ALT to maintain present altitude
3.) Set prop to cruise CTRL+F1 (900 rpm)
4.) Set power to cruise TRQ 70% (use joystick throttle control)

That's it . . . 
Congratulations, you made it 
Welcome to the wonderful world of fanda!

One more time (sequentially) with images

(click to enlarge some images)
SETTINGS

click to enlarge
1.) Fuel shutoff OFF location: Quadrant SHFT+3

2.) Main power ON location: OH top lefthand (Overhead SHFT+2)
3.) All DC Controls ON (same as item 2 top lefthand)

Note: in these images ALL the switches are in the ON positions
4.) AC inverters ON location OH top righthand (Overhead SHFT+2)
5.) AC generators ON location OH top right (Overhead)

ENGINE START
1.) Confirm items 1. thru 5. (above) are completed

2.) Start engine #2 first using Ignition-M and Select #2
press and hold the black Select button (center) . . . then . . . 

3.) Open fuel to engine #2 (click hotspot

STEERING and ANTI-SKID 

SHFT+4   SHFT+6    
SHFT+4 - Steering All ON
SHFT+6 - Anti-skid All ON

TAXI
1.) Brake set ON (CTRL+. [period])

 
2.) Condition Levers (props) MINimum CTRL+F1 (hear that sound!)
3.) Release brakes and slowly open throttles)
4.) Use rudder steering and left/right brakes (F11 F12) to turn
5.) Control taxi speed using brakes (not throttle)

TAKE OFF
Set Brakes . . . then . . .

1.) Throttle Lock OFF location Quad position SHFT+3 (find hotspot)

2.) Condition Levers  keyboard CTRL+F4 (Quadrant position SHFT+3) 

release brakes and taxi onto runway . . .
3.) Open throttle to Take-off Power (not full throttle) using joystick

If it makes a noise when you go like that don't go like that!

CLIMB OUT
1.) Rotate at 100 KIAS (Knots Indicated Air Speed)
2.) Gear then flap UP (once constant rate-of-climb established)

3.) Pull prop rpm back to 1050 using CTRL+F2
4.) Pull throttle back to TRQ 80% (3 & 4 are backwards but easier for the novice)
4.) Climb at between 130-160 KIAS

CRUISE

1.) Click the autopilot ON (AP top righthand)
2.) Click ALT to maintain present altitude

 
3.) Set prop to cruise CTRL+F1 (900 rpm)
4.) Set power to cruise TRQ 70% (use joystick throttle control)

Annunciator Panel Shot

That's it . . . 
Congratulations, you made it . . .  
Welcome to the wonderful world of fanda!

Any questions? Drop by fanda forum, they have ALL the answers!

UNDER CONSTRUCTION NOT FOR NAVIGATION

This page was last updated on 04/02/04.