Need 14 pc's 1/2" PVC 24" Long    16 pc's 1/2" PVC 12" Long

12 1/2" ELLS    12  1/2" TEE'S      Small can PVC Primer clear

24 Golf Balls       3/16" rope 20" Long White and 3 Colors  3pc's of each color

Drill 1/4" hole thru balls then drill 3/8" into one end of ball about 3/8" deep

this is for knot to hide in. if rope is larger or smaller you may have to adjust bits accordingly.

  Paint balls with acrylic paint and then coat with krylon clear spray. Push rope in small end and tie single knot. melt end. be careful rope sticks and burns if it drops on you.

  Put Pc's together using primer it will glue pc's without using any PVC glue.makes a better looking job. without that runny black or purple all over. ( NOTE ) do not use primer on bottom of legs where they fit into tee of the base.That way you can store flat when not in use.

Set frames about 30' apart

Standing beside one frame.

holding one ball in hand throw by swinging around at the far frame.

Top bar counts 1 point Middle bar counts 2 points bottom bar counts 3 points.

A wrap around vertical post counts 5 points.

Score to exactly 21  if you go over 21 deduct points over 21 from 21 and continue

until you reach 21. Or make up your own rules.

Injoy yourself

A minature marshmellow shooter

1/2" PVC 3-4", 2-3", 1-6" , 1-8"

2 ells , 2 tees , 2 caps

just fit pc's together don't glue

as it needs to come apart to wash