With the wiring loom back in the car it was time to put remember where everything went.
With the wiring loom now in the car, it was time to strip the engine bay part of the loom and tidy it up but with a few changes.
With the loom stripped it was time to add the ICE cable into the loom to tidy it's appearance.
Another view of the ICE cable inside the wiring loom.
With the Headlining off the car I added soundproofing to the roof section to help keep road noise to a minimum.
Fitting the headlining is not an easy job to do. If you do not feel comfortable doing it, I would advise proffesional help, But if you have lots of patience then try it.
The 16v Rear Calipers split and painted.
With the rear calipers bolted back together they got another coat of paint.
Fitting the Spax -60mm rear springs to the rear axle.
The rear discs also got the same treatment of a layer of red.