MULTICHANNEL SCAN INDICATOR
MODEL MPSI
 

The Artech Scan Indicator conveniently measures the temperature of several channels. It indicates on a digital display the channel being scanned at a regular interval of time, which is adjustable from 1 sec.to approx. 30 secs.per channel.

The automatic scanning can be disabled by switching the SCAN/HOLD switch to the HOLD position. Manual increment of the channels is possible in the HOLD mode by pressing the `ADVANCE' push button.

The instrument accepts inputs from sensors through terminal strips situated on the back panel.
 

  SPECIFICATIONS

Range                                                                    

-200oC to 1000oC subject to limitations of sensor

Input                                                                     

J,K thermocouples,  RTD PT-100.

Resolution                                                          

1oC

Accuracy                                                            

Better than +1% of the range.

Temperature Indication                                      

On a 3 1/2 digit 1/2" height red 7 segment LED

No. of channels                                                   

12

Automatic Scanning                                           

Approx. 1 sec to 30 secs. per channel adjustable

 

through a  `RATE' control on the front panel.

Manual Scanning                                                

Through an `ADVANCE'  push button switch

 

when SCAN/HOLD switch is in the HOLD mode

 

(Red LED indicates the HOLD mode).

Open sensor Indication                                     

If any sensor is open the corresponding channel

will indicate +1_ _ _. 

Power                                                                    

230V AC +10%, 50 Hz.

Mounting                                                             

Flush panel.

Front panel                                                         

288 mm x 144 mm

Depth behind panel                                            

Approx. 225 mm