FOUNDRY PYROMETER
MODEL FP-100
The Artech Foundry Pyrometer is a convenient handheld portable instrument for measuring the temperature of molten metals, both ferrous and non-ferrous. The instrument has a lance extension at the end of which can be fitted expendable thermocouple tips or re-usable multidip thermocouples. An automatic timing sequence initiates measurement when the thermocouple is immersed into the molten metal. The measuring sequence ends with the temperature reading being latched on display and a beeper signals the end of measurement.
| SPECIFICATIONS | |
| Range | 800oC to 1600oC |
| Input | `R' Type PT/PT-RH 13% |
| Indication | On a 3 1/2 digit red LED display |
| Character Height | 0.3" (8mm approx.) |
| Resolution | 1oC |
| Accuracy | Better than +1% of the specified range |
| Reset | By means of a push button switch |
| Measurement over | A latched
reading on the display and an Indication audio alarm from an internal buzzer. |
| Open sensor | By blinking of
all 4 digits indicating either 2048 or previously latched value with the audio alarm. |
| Crossing Temperature Level | Preset internally |
| Low Battery indication | By a red LED on
the front panel which comes "ON" when the battery voltage drops below 5 volts. |
| Power Supply (Battery) | 7.2 volts DC (6 X 1.2V NiCad rechargeable) |
| Accessories (included) | - 1 no. Lance
1500 mm long with contact block & fitting - 6 nos. BMD Thermocouple Tips Type R - 1 no. Battery Charger |
| Accessories (optional) | ALC-02 mV
Calibrator with set of Calibration Charts. Adapter for calibration through lance end. |