Voyager clock
Voyager cast clock
(I used reg. paper instead of a CD label and didn't trim it very well, hence the white, uneven edge.)
You will need:
- CD Label sticker (or you can use reg paper)
- CD you don't want (AOL typically has a never ending supply of free "Free Trial" CDs).
- Click here for the picture.
- A clock making kit, which I've found in the craft section at any Walmart store (typically near the wood crafts). Get the smallest one since a CD is very thin and doesn't need a long thingamajig to go through the center (ok, so I'm no technical wizard).
- A decent printer.
Instructions:
1. Print the picture
2. If using a CD lable, just peel and stick onto the CD. If using reg paper, just cut and paste.
3. Follow the instructions on the clock making kit. You may want to paste a sheet of paper or small piece of poster board across the hole in the center of the CD, then punch a small hole just big enough so you can slide the clock piece through it, to keep the CD from being loose around the base of the clock. Or you could just place the CD between two washers that are larger than the hole...
4. Hang on the wall and enjoy!
Main | Music | Pix | Fun Stuff | Links
