***********************
*** Arrowpointe 4.8 ***
***********************

This is the newest and greatest...

***************************** Warning ********************************
* I have included the Public Release of Magic 3m for an activation.  *
* This activation corrupts parts of the card that cannot be fixed    *
* with a standard clean.  You must restore the original, saved image *
* to fully remove the activation changes.                            *
*                                                                    *
*     Boys will say "fuck it", Men will say "let me read it first"   *
*                 Lets separate the men from the boys                *
*                                                                    *
* REMEMBER - This software is to popular for Dave/Larry to ignore it *
*            Use it at your own risk                                 *
*          - it takes about 15 minutes to regen the final key        *
*            you will see "PLEASE STAND BY" until it catches up      *
**********************************************************************

In the near future, I will be releasing Hex Packs that will contain 
the newest activation releases.  These packs will be available to 
everyone who has supported me in this.  I do the research anyway
so why not pass it out to those who have helped me.

I will have a new private activation for Thanksgiving and Christmas.
I hate it when Dave ruins the holidays like he has for the last few years.  


Cloning can be done in this version...
I do not recommend it but there are those who have not
saved thier old image(for whatever reason) and they
are stuck with public images.

Just save the image in hex format and write the HEX to another card.  
Just make sure that the images match.  6b on a 6b and not on a 4b ect.

If you choose to do this, 
choose NO when asked about Basic Activations for the Hex.


***********************************
* * Thoughts from the 15th Hour * *
***********************************
I hope everyone knows that what we are using is considered
Highly Technical Software that does low-level routines
to smartcard technology.

You are, in essence, using the software that the Experts use.
If you are not using the same equipment or understanding that
they use then you WILL have problems.

I am hearing reports of people glitching for 45 minutes and then
looping the card.  All this on a flashed WTX...
Truthfully, How did they glitch that long????

The Den members are starting to learn how to share info.
They say "flashed <whatever> looped my card with Arrowpointe"
or "Eclipse X.X did this when ... using ..."
This is the only way to fly, Free exchange of information.

I do use a Mikobu for testing this software
and it is the best I have used so far. (http://64.65.21.8/)
I have not gotten anything from them in trade for
my endorsement and even went in halves with a fellow member
to get the one I have.

I only have an email that says "where do I get a Mikabo?"
sorry about the spelling...

They are the best in my experience.
An H unlooper is still an H unlooper.
If you want to do it right, you know where to go.
(http://64.65.21.8/)


***********************
* * Version History * *
***********************
Forthcoming - Added text file support for storing USW keys
            - Import/Export function for sharing keys
            - RandomHU type interface for pre-configuring Activations in toolbox
            - Zipcode nullification
            - Custom TimeZone
            - Hex Packs
            - Revamp the Toolbox routines

Version 4.8 - Streamlined Boot Reporting
            - Issued to donators only for Beta testing of Secure ID / Access Code
            - Then released it to the den with no reg required (too hard to eMail)
            - Added Public Magic Activation

Version 4.7 - Added Hex Write Routine
            - Activated Hex Save Function (see toolbox)
            - Removed Line 1 in HEX File to allow cloning (NOT RECOMMENDED)

Version 4.6 - Fixed "insert card" problem when card is put in
            - Activated Security Code Option
            - Using trap-door method instead of additive-inverse
            - Repaired Security Violation Routine as per feedback from Delphi Leeches
              (Hacking this program will result in Looped Cards!!!)

Version 4.5 - Made CSW check optional (control in toolbox)
            - Full Boot Routine rewrite (Type III - Clock alter)
            - ATR monitor added
            - Renamed "Fixing USW1 ECM target" to "Restoring Cmd90 Vector"
            - *** Released to public

Version 4.4 - Fixed the toolbox so it would not erase the reg codes
            - Version 5.0 will require the Access code in order to work
            - Updated the Swiss Slice for CSW 00 03

Version 4.3 - Added Registration Requirement
            - Next release will require the Access code in order to work
              I just don't want to deal with it right now
            - *** Released to public

Version 4.2 - Repaired stupid mistake in hex write routine (it now works right)
            - Optioned standard card actions in hex write
            - Opened up the restrictions in the zip code entry

Version 4.1 - Added Cleaning of PPV area on Subscribed cards
            - Working on Cleaning of Total Purchases on Subscribed cards
            - Working on Reset of Total Allowed For Purchases on Subscribed cards
            - Added "Use On Subs Only" message
            - *** Released to public

Version 4.0 - Updated Swiss Slice to CSW 2 in cleaning
            - Modularized Read/Write EEPROM routines
            - Added CSW Monitor for Cleaning

Version 3.8 - < Skipped to 4.0 (CSW 02 occured) >

Version 3.7 - Moved Time Zone Settings to Toolbox
            - Cleaned Up Toolbox
            - Moved Virgin IRD setting to Toolbox
            - Updated INI file to reflect changes

Version 3.6 - Deleted MediaPlayer use and went to sndPlaySound()
            - Added TXT saving routine
            - Narrowed the restart requirement to Com change only
            - Added String Security

Version 3.5 - Added USW/CSW key monitoring algorythm
            - *** Released to public

Version 3.4 - Re-Figured Timeout to 5 to prevent ATR looping on 4B cards
            - Limited Cleaning to USW 1 or USW 0

Version 3.3 - Added Jump Table Monitor and specified cleaning allowances

Version 3.2 - Verified cleaning results on 6B cards
            - Moved SoundActive to toolbox

Version 3.1 - Added Multiple COMport support to toolbox (program restart required)
            - Removed HUpro type Comport Selection 

Version 3.0 - ReDefined Cleaning Matrix for 2DE0/2AD3/2EE0/2EF8 changes
            - Figured out the CSW key 
            - redefined swiss-slice for cleaning (holes stay the same)
            - Moved 6b patches to main swiss slice
            - Added Toolbox
            - Added INI support (Why bother the registry, Keep it out of the system)

Version 2.2 - Added HUpro type Comport Selection (boring)
            - Fixed soundcard issue(I Think, How can you not have a soundcard?)

Version 2.1 - Rewrote Write Card Routine to handle both HEX and BIN Writes.
            - Added Layer2 and Layer3 Hex file checks.
            - Added detection of encrypted and unencrypted hex files.
            - Added Checksum Verification error routine.
            - *** Released to public

Version 2.0 - Included Borland Runtime DLLs. (screw the license)
            - Added Support For HEX files.
            - Added try/catch routines to assure Hex File accuracy.
            - Separated TZ/ZC routine to work alone or with WriteHex.
            - Now using direct memory access to data tables.

Version 1.4 - Modularized the device command structure.
            - Added GuideByte Restoration Routine.
            - Added Activation Code Checksum so I don't jump into 
              an unexpected change that dave made.

Version 1.3 - Added Notify.wav to play when card booted.
            - Added Debug mode to redirect writes to status window.
            - Added Signature check to WriteBIN to prevent Cloning.
            - Added full 6B support in cleaning.
            - Added "Pirate's Den" Message for release version.

Version 1.2 - Dealt with bad ATR problem in boot. (timeout 3 rounds)
            - Using 12 digit filename for saving bins.
            
Version 1.1 - Using series 2 stack clearing routines. (non-public don't ask)
            - Wrote WriteHuAt and ReadHuAt functions.
            - Rewrote Activation Routine to use unreleased jump points.
            - Wrote in CAM 12th digit calculation.

Version 1.0 - Rewrote Device Access Routines from HUpro. 
            - Rewrote Thread for speed and cleared goto bottleneck.
            - Designed new interface to reflect current information needs.
            - Complete rewrite of the boot card function.
            - Wrote installer for my private Activation.
            - Forced a repair of all known ECM targets regardless of selections.


