| edit FireTruckStatus.dat |
| below is a screenshot of part of the FireTruckStatus.dat with comments |
| editing of this file is not normally required, colours can be changed in fields 5 and 6 |
| DO NOT change the first four characters, this is your serial number. Change that and your software will not work eg 8C22 is Noels serial number |
| once a valid decode has arrived, lets say C5641F1700C. a match is looked for in the Callsigns.dat file, it finds C5641F with says is Glen Eden 64_1 (Pump) with a further decode file of 1 1 in Selcall+.cfg is FireTruckStatus.dat FireTruckStatus.dat says a decode of 1700C means K7 hence a C5641F1700C is "Glen Eden 64_1 (Pump) K7 - At Normal Station" is displayed in Decode Scroll window |
| return signal: once a valid decode has arrived, lets say C55641 (return selcall is never the same, this is so all the radios know which way the selcall is going). a match is looked for in the Callsigns.dat file, it finds C5564 with says is Glen Eden 64_1 (Pump) with a further decode file of 4 4 in Selcall+.cfg is FireTruckAnswerback.dat FireTruckAnswerback.dat says a decode of 1 means K7 ACK hence a C55641 is "Glen Eden 64_1 (Pump) K7 ACK" is displayed in Decode Scroll window |
 |
| I have heavily editted my file to change the standard setup (standard setup shown)
|
