With the TARANTULA secure onto the shelf I was able to fit the 3 Phoenix
Gold amplifiers and the links onto the rear of the enclosure without
difficulties. The three amplifiers are mounted on two
1"x 25" strips of MDF so as the wiring could be run down the center,
underneath the amps. The power, earth and remote distribution blocks were
mounted in the nearside passenger door and all wiring runs to it. The
Phoenix Gold Pro line Driver and Bass CUBE are also mounted there and power
taken from these blocks.
The Optima Batteries were then fixed in place and distribution blocks for the rest of the system were fitted below the hinged shelf. Once the batteries were connected, the entire system sparked into life... :)
