[
Home ] [ My
Car ] [ Me ][ Tech
][ Nerd Stuff ][ Events/Shows
][ Car
Gallery ]
![]()
How To..
Some of these are really simple to do. but i'll put them up anyways. now u too can work on your car. i'm not liable for your mistakes so.. have someone supervise you if you aren't too sure..
How To...
... annoy your car freak boyfriendIntegra 94-01 Install corners/replace bulbs. -Eww!!
Greasy Junk
unscrew screw with phillips screwdriver (the one with the
"X") , pop out corner, half-twist right to take out light, use clean
fingers or soft cloth to turn light and replace, twist back in both lights slide
back into the metal rectangle hole. screw back on screw.
Change a Flat Tire. -Lugnuts/Bolts and
Dirty hands.
Always remember "Righty Tighty.. Lefty Loosey..
". Pull all the fun stuff out of the trunk(spare tire, jack, little kit
with tools) You'll have to break the bolts loose while the car is down (turn to
right).. then jack the car up.. unscrew bolts(last bolt to be unscrewed
should be on the top-most position. so you dont drop it on your foot!), pull off
tire swap with spare. place lugnuts back on top most first. Twist lugnuts to
left.. then tighten with fingers in this order. top, bottom, left, right.. once
they are secure you can slowly lower the car. bust out the handy dandy metal
thing from the tool kit. If you are a small girl like me tighten to about the
pressure of three fingers holding the wrench. Ta-Daa..
Undent Your Car: free style..
~Coming Soon~
Take your bumper off/on: both in 30min
~Coming Soon~
JDM ITR Gauge Cluster Install
~coming coon~