Ford Powerstroke Intercooler
Adapted to a Turbo Buick
I'm hosting this info and pics for Rob Archer who dared to try something new. Evidently it was a success!
This copied from the website, I attached all the pics I have. It's pretty
straight forward, but on a street car you'll have to be careful and cut
a little at time to clearance the header pnl fron the IC. Mine is drag
only so I just hacked away but after looking at it, there is just enough
room for it to fit and keep the high beams. One other thing I left out
of the parts list was the adapter from Cotton's from the turbo to the 3"
IC pipe. It's 22.00 and works great. I now have the intercooler all installed
and ready to go. It looks KILLER!!!!! The 3" piping looks even better!
Here are the part numbers from NAPA. I'll try and get some pics asap. Rob
#41972-1ea # 42344-1ea # #41685-3ea and #620 2.5-3Ft F 81Z-6 K775-BA 1999
or 2000 ford truck w/"powerstroke" deisel engine Rob Archer 87 Turbo T,
PTE51, stock IC and motor and TC, 62mm JJ T-body, MSD 50's, 16 pos Maxeffort,
340&hotwired, THDP w/3"single shot exhaust, 90/10frt-60/40rear shocks,
longer boxed lower arms, snubber, airbags, batt in trunk, fiberglass hood,
Directscan, egt, etc. etc. best et
11.48@118
w/1.75 60'
For more info:
mailto:raflyer@home.com
Back to Index