Site hosted by Angelfire.com: Build your free website today!

Roller Coaster Tycoon 2

Remake of Summit Plummet

Summit Plummet 2

E I N Max Speed Avg. Speed Ride Length Positive G's Negative G's Lateral G's Drops  Highest Drops Inversions
1.65 18.5 11.1 76 mph 20 mph 4,314 ft 6.91 -2.68 5.39 10 91 ft 5
1.4 16.1 10.1 54 mph 18 mph 4,075 ft 5.12 -1.28 3.52 11 62 ft 5
1.4 17.1 10 54 mph 15 mph 3,888 ft 5.12 -1.28 3.52 10 62 ft 5

Steps taken to covert this corkscrew roller coaster from RCT 1 to RCT 2.

Converting Summit Plummet 
  • Boosters before loop removed.
  • Took top part of sharp helix & steep hill before helix lower to match.
  • Loaded into RCT2 Roller Coaster Designer had trouble loading due to messaging saying " supports too tall".
  • Back in RCT 1 took lower track  out by building over it exactly at a greater height. Also contacted to the station by dropping to it, instead of raising.
Making Summit Plummet ride able.
  • In RC Designer moved station to where the brakes used to be.
    Then connected the station to the lift hill at new station height.
  • Banked curves, removed half loops

Banked Versions of Summit Plummet 2

RCT2 Page