69 CAMARO EMISSIONS DECALS

We have done the normal scrutiny and taken the necessary steps to make these as correct as possible.
These are not formulated in an hour or two. Like all our products, you should find these are the
most accurate ones available today. My software guru buddy Shaun has again performed his magic.
These are $8 including shipping. Go to my email link below if you would like to ploace an order.




Z/28 302 CI 290 HP
and
SS L48 350 CI 300 HP
and
LM1 350 CI 255 HP

The first image below is a side by side comparison between an original and two reproductions
currently available. As with most of the current reproductions there are numerous spacing, alignment and
font errors. These should be quite noticeable.



The next image is a side by side comparison between the original and our product. All the spacing and
alignment concerns are not there with ours. A couple of very small items to highlight here. One, on the
sixth line down from the top where the "1/4" is shown - notice how different the angle of the "/" is on
the original compared to the repros. Second, on the bottom Red lines notice the "degree" symbols on the
original and see how large they are and the fact they are not at the upper most position in that character space.
Now look at the repros which have very small symbols and are up high in the character space.
Could you consider these little facts as being a little anal? I suppose, but why not attempt
to be as correct as possible.






396 CI - L35 325 HP and L34 350 HP

When you look at the current reproduction available you will see that the alignment and spacing is
nowhere near the original. This is primarily evident on the first three lines and the last three lines.
Thanks to fellow enthusiasts Phil and Bill for providing pictures of originals.

NOTE: there should be a line under the word "each" which has been corrected since posting this picture.







396 CI - L78 375 HP

All the same inconsistancies on the reproduction as with the one above. Incorrect alignment
of all lines, particularly the top two and the vertical part number. Each line does not line up properly
with the lines above and below it. Asterisks are wrong colour, incorrect size and not properly poistioned
on the repro. The several hyphens are shown as "single" on the repro when they should be "double".

NOTE: there should be a line under the word "each" which has been corrected since posting this picture.





My Email For Order Enquiries
If a security window shows up just click "allow"

HOME