OK, not a lot to say here. The project is on 3. This is always the first big mile stone to get your project on 3 so you can begine to start adding things and defining how its going to look. Lots of different ways you can go from here. I like my Trikes to be a bit longer than a lot of guys like them. I think they ride better and handle better. But thats just my opinion. If your building a Trike, you get to build it however you like. My wheel base is right at 10 foot axle to axle, thats within a few inches one way or the other of every Trike I have built. I just like um that way. Well actually thats not true. The last one I built and sold was 9 foot axle to axle and I have to say, I wasn't real happy with it. It was a little light in the front end and would pop a wheelie to easy. I don't like that in a Trike. Now that length would be ok with a auto trans because you don't release the clutch to fast with an auto. In case you want to know, my I beam is 4 foot from the torsion bar to the bend upwards. I usually start with a 7 foot section then cut off what I don't need at the top.
