Thanx Goto PULSE for permission to use his cable diagram....

::: The Cable :::

The software is fairly self-explanatory, the only thing you need to know is
how to make the cable. And there is a slight catch here;

The end of the cable that connects the phone is a bit tricky. I myself have a
load of little PCBs that slot into the correct part of the phone and I solder
the wires onto this every time I make a cable up. If you know me personally
I can sort you out with an end, if not they're easy enough to make up on a 
PCB machine, and if you're _really_ stupid you can buy the cables at next to
nothing prices out of Exchange & Mart or something these days.
              
               
           _________________                 _________________
          |  | | | | | | |  |               |  | | | | | | |  |
          |  | | | | | | |  |               |  | | | | | | |  |
          |          | | |  |               |        |     |  |
          |          | | |  |               |        |     |  |
          |          |  \|  |               |        |     |  |
          |          |   |  |               |        |     |  |
          |          |   |  |               |        |     |  |
          |_________ | _ | _|               |_______ | ___ | _|
                     |   |                           |     |
                     |   |                           |     |
                     |   |                           |     |
                     |   |                           |     |
                    [R]  |                           |     |
                     |   |                           |     |
                     |   |                           |     |
                    [19] [20]                       [11]  [8]


Value of Resistor R = 10k
Numbers in square brackets represent Pin number on D-Plug (-> Printer Port)

The large squares represent the top and underside of the phone end of the 
cable. You should have a small PCB with 7 contacts at the end (represented
by  |  in the diagram above).
    | 

As you can see I was never any good at ASCII diagrams...

That should set you on your way.

=(*)=Pulse=(*)=                  
