ALERT LENGTH
  The setting in this field determines the length of the alert when a
  page is received.  The selections are 2 sec., 8 sec., 16 sec.,  and
  Manual.  When  Manual  is  selected,  the pager alerts indefinitely
  until the user presses any button on the pager.

AUTO ON/OFF
  When this  option is set to Yes,  the  Auto On/Off  feature is
  enabled in the pager.   This option  allows the user to  select the
  times at which the pager automatically turns on and off.

AVAILABLE KEYS HELP FILE
  F2............... Key Help
  Page Up.......... Previous page of help file
  Page Down........ Next page of help file
  F10, ESC......... Close Help window

BEEP ON BAD DATA
  This option  determines what  actions  taken when the pager detects
  an error in an incoming message.   If  this  option is set  to Yes, 
  the  pager  alerts  and   displays  an   "error"   following    the 
  incoming message.  If this option is set to No, the pager  discards
  the entire message and does not alert.

CODE ALERTS
  The pager can be  programmed  to  audibly  alert  with  one  of the
  following alert types: BeepTone, Arpeggio, Ring, Astral, Triangle.
  If this option is set to User Selectable,   the user can select any
  one of the above alerts via a menu choice in the pager.
  
CODE TYPE 
  Both  pager  codes can be assigned as Individual and/or Group Call.  
  When Individual is selected,  only a single user will  receive  the 
  incoming messages.  

  Pagers  equipped  with the same Group Call code can all receive the 
  same messages at the same time.  

CODING FORMAT
  The Coding Format  is  the  signalling  format  which  is  used  to 
  communicate  with  the  pager.  There  are  three formats to choose 
  from: POCSAG 512, POCSAG 1200 and POCSAG 2400.  
 
COMPLETELY SILENT 
  When this option is set to Yes, no audible or vibrator alerts occur  
  at  all.   Setting  this  option  to  Yes also  disables the
  Reminder  Alert,  Alert  Length,  Enable  Vibrator,  and   Escalert 
  options.

CUSTOM POWER UP SCREEN
  Whatever  is entered for this option will be displayed by the pager 
  upon power up.  Only the following are allowed: 
           * digits 0-9
           * a space " " 
           * a dash "-"

  The  message  cannot  contain  any  of the codes (A and B)  in  any 
  fashion,  be it forwards or backwards,  or separated by a space,  a 
  dash or any non numeric character.  If you wish the pager to  power 
  up normally, then leave this field with dashes.  

        Note:  A blank power up  screen is not allowed.  If the power 
               up screen is blank, it will be reset to dashes.

CUSTOMER REQUEST DATA INVERSION                  
  This  option allows the user to override the default data inversion 
  setting.

CRYSTAL DRIFT ADJUST  
  This option  allows  for  error adjustment  of  the  timer crystal. 
  This adjustment  should  only  be performed by  a  trained  service 
  technician.  

  The valid choices are -14 thru 14. The value you choose will be the 
  new  second's  adjustment value.  This value is set at the  factory 
  and  should  not  be  changed  unless  the  pager  timer crystal is 
  replaced.  

DATE FORMAT
  This option determines the format in which the date displays on
  the pager standby screen.

  Valid selections are DD-MM (Day-Month) or MM-DD (Month-Day).

DISPLAY DATE
  When this option is enabled, the Date function is enabled in the
  pager.

DISPLAY SLOT NUMBER 
  When selected, this option allows the pager to display the location 
  in memory of the message you are reading.  

DISPLAY TYPE
  This option sets the display to color or monochrome.  A selection of
  "Auto" will allow the computer to determine the setting which best
  matches the hardware.

  Note:  Some computer monitors support color through different shades
         of a single color.  For these monitors, a selection of "Mono"
         is recommended.

ENABLE VIBRATOR
  When placed in "silent mode", selection of  this  option  will cause 
  the pager  to  emit  a  vibration, as  well as, a visual alert, when 
  it receives a message. This allows users to silently receive and  be 
  alerted to pages. 

  If this option is not selected while in "silent mode", the pager will 
  emit an audible "chirp" alert.
 
ESCALERT
  When this option is set to Yes, audio alerts begin at a low volume 
  and increase in volume as the alert continues.  Note that the Escalert
  option has no effect on the alert volume when a 2 second Alert Length
  setting is used.

FREQUENCY
  You must enter the frequency the pager  is  to  operate  at.  Valid 
  ranges are:               

         33.0000 to  36.9999 MHz
         40.0000 to  49.9999 MHz
         83.0000 to  87.9999 MHz
        135.0000 to 174.0000 MHz
        278.0000 to 284.0000 MHz
        406.0000 to 423.0000 MHz
        435.0000 to 512.0000 MHz
        929.0000 to 932.0000 MHz

FUNCTION TYPES
  This  field  determines  which type of data will be associated with 
  each function.  The different pager functions are as follows: 
                        
                           X - Not Active
                           T - Tone Only
                           N - Numeric
                           O - OTA  

HARD-CONTACT - COMMUNICATIONS PORT
  Determines the serial port used for communicating with the Motorola 
  Universal Programming Interface.  

  Valid values are COM1, COM2, COM3 and COM4.  

INVENTORY CONTROL NUMBER 
  The Inventory Control Number is an identification number which  you 
  assign  to  the pager.  This number is stored in the pager.  Unlike 
  the Serial Number of the pager, this number can be changed per your 
  needs.  It is also important to note that the data entered in  this 
  field  is  the default filename used to create the archive file for 
  this pager.  Therefore, it is important to enter a unique Inventory 
  Control Number  for  each  pager  if  you  are  saving each pager's 
  configuration to disk.  


KEY HELP - DATA ENTRY FIELDS
  F1......................... Help
  F2......................... Key Help
  F6......................... Reset current field to default   
  F7 or Page UP.............. Backup to previous menu
  F8 or Page DOWN............ Advance to next menu
  F10 or ESC................. Exit to Main menu 

  ENTER or DOWN Arrow ....... Advance to next field
  UP Arrow .................. Backup to previous field 
  LEFT Arrow ................ Move cursor left
  RIGHT Arrow................ Move cursor right
  TAB........................ Advance to next column  (when exists)
  Shift+TAB.................. Backup to previous column (when exists)
  HOME....................... Move to first field
  END........................ Move to last field 
  BACKSPACE.................. Move cursor left & delete character
  DELETE..................... Delete character at cursor
  INSERT..................... Insert character at cursor 
  SPACE...................... Clear field or add spaces (except for 
                              Frequency field) 
KEY HELP - DATA ENTRY FIELDS - INSTALL     
  F1......................... Help
  F2......................... Key Help
  F6......................... Reset current field to default   
  F10 or ESC................. Begin installation

  ENTER or DOWN Arrow ....... Advance to next field
  UP Arrow .................. Backup to previous field 
  LEFT Arrow ................ Move cursor left
  RIGHT Arrow................ Move cursor right
  TAB........................ Advance to next column  (when exists)
  Shift+TAB.................. Backup to previous column (when exists)
  HOME....................... Move to first field
  END........................ Move to last field 
  BACKSPACE.................. Move cursor left & delete character
  DELETE..................... Delete character at cursor
  INSERT..................... Insert character at cursor 
  SPACE...................... Clear field or add spaces
KEY HELP - DATA ENTRY FIELDS - SETUP
  F1......................... Help
  F2......................... Key Help
  F6......................... Reset current field to default   
  F8......................... Save configuration settings
  F10 or ESC................. Exit to Main menu 

  ENTER or DOWN Arrow ....... Advance to next field
  UP Arrow .................. Backup to previous field 
  LEFT Arrow ................ Move cursor left
  RIGHT Arrow................ Move cursor right
  TAB........................ Advance to next column  (when exists)
  Shift+TAB.................. Backup to previous column (when exists)
  HOME....................... Move to first field
  END........................ Move to last field 
  BACKSPACE.................. Move cursor left & delete character
  DELETE..................... Delete character at cursor
  INSERT..................... Insert character at cursor 
  SPACE...................... Clear field or add spaces
KEY HELP - PAGER CODES 
  F1......................... Help
  F2......................... Key Help
  F6......................... Reset current field to default   
  F7 or Page UP.............. Backup to previous menu
  F8 or Page DOWN............ Advance to next menu
  F10 or ESC................. Exit to Main menu
             
  ENTER or DOWN Arrow ....... Advance to next field
  UP Arrow .................. Backup to previous field 
  LEFT Arrow ................ Move cursor left
  RIGHT Arrow................ Move cursor right
  TAB........................ Advance to next column  (when exists)
  Shift+TAB.................. Backup to previous column (when exists)
  HOME....................... Move to first field
  END........................ Move to last field 
  SPACE...................... Reset Pager Code to "None"
KEY HELP - SCROLL FIELDS 
  F1......................... Help
  F2......................... Key Help
  F6......................... Reset current field to default   
  F7 or Page UP.............. Backup to previous menu
  F8 or Page DOWN............ Advance to next menu
  F10 or ESC................. Exit to Main menu
             
  ENTER or DOWN Arrow ....... Advance to next field
  UP Arrow .................. Backup to previous field 
  LEFT Arrow ................ Move cursor left
  RIGHT Arrow................ Move cursor right
  TAB........................ Advance to next column  (when exists)
  Shift+TAB.................. Backup to previous column (when exists)
  HOME....................... Move to first field
  END........................ Move to last field 
  SPACE...................... Toggle through choices       
KEY HELP - SCROLL FIELDS - INSTALL          
  F1......................... Help
  F2......................... Key Help
  F6......................... Reset current field to default   
  F10 or ESC................. Begin installation
             
  ENTER or DOWN Arrow ....... Advance to next field
  UP Arrow .................. Backup to previous field 
  LEFT Arrow ................ Move cursor left
  RIGHT Arrow................ Move cursor right
  TAB........................ Advance to next column  (when exists)
  Shift+TAB.................. Backup to previous column (when exists)
  HOME....................... Move to first field
  END........................ Move to last field 
  SPACE...................... Toggle through choices      
KEY HELP - SCROLL FIELDS - SETUP
  F1......................... Help
  F2......................... Key Help
  F6......................... Reset current field to default   
  F8......................... Save configuration settings
  F10 or ESC................. Exit to Main menu
             
  ENTER or DOWN Arrow ....... Advance to next field
  UP Arrow .................. Backup to previous field 
  LEFT Arrow ................ Move cursor left
  RIGHT Arrow................ Move cursor right
  TAB........................ Advance to next column  (when exists)
  Shift+TAB.................. Backup to previous column (when exists)
  HOME....................... Move to first field
  END........................ Move to last field 
  SPACE...................... Toggle through choices       

MAIN MENU 
  In  general the screen is divided into the following three sections: 
  ͻ 
   MOTOROLA Pager Program Software  <Instruction Message Line  1>   
   Motorola Product Name            <Instruction Message Line  2>  
                                    <Status/Error Message Line 1>   
    <Menu Pathname>                 <Status/Error Message Line 2>  
  ͹ 
          <  Screen  Data  Entry  /  Display  Area   >               
  Ľ 
   F1     F2     F3     F4     F5      F6      F7     F8   F9    F10
   HELP                <brief function key operation>            EXIT 

  F1 - Displays text help file for this menu.

  F2 - Displays the available keys for this menu.

  F3 - READ/PROGRAM Pager
       This section allows you to read and change a  pager's  options 
       and  configuration.  Selecting  this option will try to read a 
       pager   connected   to  the  Motorola   Universal  Programming 
       Interface.  After  the   contents  have  been  read  from  the 
       pager the READ/PROGRAM menu will be displayed.

       If a pager is not connected,  an error message  is  displayed, 
       then you may proceed to the READ/PROGRAM menu if desired.
  
  F4 - RETRIEVE an Archive File  
       This   section   allows  you  to  retrieve  one  of  the  pager 
       configurations which you have saved to  disk.  If  you  have  a 
       problem with a specific pager, you can recall the configuration 
       file  from  disk  and  program  a  new  pager with the original 
       options.  This feature also allows you  to  retrieve  a  common 
       configuration from one of your template files and program a new 
       pager with less effort.  
          The files are stored in the \ULTRAEXP\ARCHIVE.DIR directory.

  F9 - SETUP computer configuration
       This section allows you to change your computer configuration.  
       You may change  the  communications port  used  to  communicate 
       with the Motorola Universal Programming Interface, your display 
       type, and the software  password.  

 F10 - EXIT to DOS
       Will exit the software and return to the DOS prompt.  
MAIN MENU KEYS
          F1......................... Help
          F2......................... Key Help
          F3......................... READ/PROGRAM a Pager
          F4......................... RETRIEVE an Archive File
          F9......................... SETUP
          F10........................ Exit to DOS
          ENTER ..................... Process selected options    
          DOWN Arrow ................ Advance to next data area
          UP Arrow .................. Backup to previous data area 

MESSAGE FORMATTING  
  This option allows the  user to choose the type of formatting to be
  used for  messages  received.  When set to Dash-Dash, the format
  800-555-1212 is used.  When set to Space-Dash, the format
  800 555-1212 is used.  When set to None, messages are not
  formatted.

  In order for  messages to be formatted,  they  must be  exactly 10
  characters long,  they must not contain any formatting characters, 
  and they must not contain any errors.

NAVIGATIONAL KEYS 
  F1......................... Help
  F2......................... Key Help
  F6......................... Reset current field to default   
  F7 or Page UP.............. Backup to previous menu
  F8 or Page DOWN............ Advance to next menu
  F10 or ESC................. Exit to Main menu
             
  ENTER or DOWN Arrow ....... Advance to next field
  UP Arrow .................. Backup to previous field 
  LEFT Arrow ................ Move cursor left
  RIGHT Arrow................ Move cursor right
  TAB........................ Advance to next column  (when exists)
  Shift+TAB.................. Backup to previous column (when exists)
  HOME....................... Move to first field
  END........................ Move to last field

OUT OF RANGE
  When the pager is outside the coverage area of  the  paging  system 
  continuously  for  the time selected,  the 'Out-of-Range' screen is 
  displayed.  This option allows the user to select the out of  range 
  time  limit.  If the time selected is 'None',  then this feature is 
  disabled.  


PAGER CODES
  The Code of your pager is actually the address of the  pager.  This 
  address  is  an  identifier  which allows the pager to decide which 
  messages being transmitted are intended for it.  

  For POCSAG pagers:
     - The address must be 7 digits long (valid digits are 0 - 9). 
     - Code A and Code B addresses must be in the same frame.
     - A valid POCSAG address must be in one of the following ranges:
                   0000008 - 2007663
                   2007672 - 2045055
                   2045064 - 2097143

  If you violate any of the restrictions, the program will notify you 
  of the problem.  Closer inspection of  the  codes  may  indicate  a 
  mistyped  code.  If  this  does not seem to be the problem,  please 
  contact someone who is knowledgeable about the technical aspects of 
  code assignments.  

PAGER PASSWORD
  For security purposes your pager has been equipped with a password.  
  For optimum pager security,  each pager should be assigned its  own 
  unique   password.   This  minimizes  the  possibility  of  someone 
  tampering with your pagers.  Assigning a  common  password  to  all 
  your pagers should be discouraged since someone who wants to tamper 
  with  your  pagers  would only have to know a single password to do 
  so.  

  The Pager Password is 10 characters long and  may  consist  of  any 
  combination of A-Z, 0-9 and space.  

PAGER PASSWORD REQUIRED
  For  security  purposes  your  pager  has been assigned a password.  
  Activation of this option will require the password to  be  entered 
  when you are reading or programming the pager.  

  This  option  restricts  reading  and programming the pager to only 
  those who know the pager's password.  

PEOPLES REPUBLIC of CHINA  
  When selected,  the pager will use a special  Peoples  Republic  of 
  China message character set.  

PRIORITY FUNCTIONS
  This  field  determines  if  each function has Priority Override or 
  not.  

  When a function has Priority Override, an incoming page will always 
  alert audibly ( unless the pager is in the Completely Silent mode).  
  Priority Override can be selected on any of the pager's addresses.  

PRODUCT PATH
  This is the full pathname of the directory in  which  the  Motorola 
  Programming   Software  files   are  located.  This   parameter  is 
  initialized only during software installation.  

PROGRAM PAGER MENU
  F1 - General HELP for this Menu. 

  F2 - Available keys for this menu.

  F4 - PROGRAM Pager
          Selecting this option will program the pager  options  with 
          the changed values.  

  F5 - PRINT Configuration 
          Pressing  this  key  will  produce  a hardcopy of the pager 
          options.  This printout will be sent to a printer connected 
          to LPT1:.  

  F6 - SAVE Configuration 
          Selecting this option will save the pager configuration  to 
          an archive file for future use.  

  F7 - PREVIOUS Menu 
          Pressing this key will take you back to the previous menu.  

  F8 - NEXT Menu 
          Pressing this key will advance you to the next menu.

 F10 - EXITS to MAIN
          Returns to the Main Menu.  

PROGRAM PAGER MENU KEYS 
          F1......................... Help
          F2......................... Key Help
          F4......................... PROGRAM a Pager
          F5......................... PRINT Pager Configuration
          F6......................... SAVE Pager Configuration
          F7 or Page UP.............. Backup to previous menu
          F8 or Page DOWN............ Advance to next menu    
          F10 or ESC................. Exit to MAIN                
          ENTER ..................... Process selected options    
          DOWN Arrow ................ Advance to next data area
          UP Arrow .................. Backup to previous data area 
READ PROGRAM MENU 
  F1 - General HELP for this Menu.

  F2 - Available Keys for this Menu. 

  F3 - PROGRAM Sequential pagers
          This  section allows you to select the options you want for 
          a group of pagers.  The Inventory Control Number and  Pager 
          Codes  which  you  enter  will be automatically incremented 
          each  time  through  the  programming   sequence.   As   in 
          programming  single  pagers,  you  may  change  any  of the 
          options, program a pager, save the configuration to disk or 
          print the configuration.  Pressing F10 or ESC at any of the 
          menus will terminate the sequential programming and  return 
          you to the Main menu.  

  F4 - PROGRAM a Single pager
          This  section  allows you to select the options you want in 
          your pager.  You may then choose to program a  pager,  save 
          the configuration to disk, or print the configuration.  

 F10 - EXIT to MAIN
          Returns to the Main Menu. 
READ PROGRAM MENU KEYS 
          F1......................... Help
          F2......................... Key Help
          F3......................... Program SEQUENTIAL
          F4......................... Program a SINGLE Pager
          F10 or ESC................. Exit to MAIN
          ENTER ..................... Process selected options 
          Down Arrow ................ Advance to next data area
          UP Arrow .................. Backup to previous data area

REMINDER ALERT ENABLE
  Choosing  this option causes the pager to remind you when there are 
  unread pages in memory.  An alert will sound  every  2  minutes  if 
  there  are  unread  pages.  If the  pager is in the audible mode, a 
  chirp will sound.  If the pager is in the silent mode, the vibrator 
  will be turned 'On' during this period.  In Completely Silent mode, 
  this option is deactivated.  

SEQUENTIAL LOCKOUT
  For  wide  area  coverage  some  systems  use multiple transmitters 
  located throughout the coverage area.  By  transmitting  the  pager 
  information  sequentially  from  one  station  to  the  next,   the 
  likelihood that the pager will receive the information is high.  By 
  setting a sequential lockout time,  the pager will ignore duplicate 
  transmissions  within that time period and will not alert more than 
  once.  

SHOW SOURCE
  When this option is set to Yes, the source of the message received
  displays on the service screen.

SILENT AUTO ON/OFF
  When this option is set to Yes, the pager does not alert or chirp
  during automatic power on and off.

SOFTWARE PASSWORD
  To protect your Programming Software from unauthorized use, you may 
  put a password on the software.  You may remove  the  password  for 
  this  program  or you can change the password to something new.  If 
  you leave this area blank, you will not need to enter a password to 
  execute this  program.   If you are not installing the software  be 
  sure to save the new configuration using F8 before exiting.  

TIME FUNCTIONS ACTIVE
  This  option  will  provide the time of day on the display when the 
  pager is in standby mode.  

TIME STAMPING
  When this option is enabled, the time that a message is received is
  displayed on the service screen following the message.

END OF HELP 

