NEC P7 Cellular Phone Programming

This information is from an australian version, it is not known if it works on any others.

9*762##074 FCN RCL 76 RCL #01

RCL #71 to get into NAM programming mode, then the steps are:

1. PRESS # Enter MIN
2. PRESS # THEN THE 4 DIGIT LOCK CODE
3. PRESS # THEN THE HOME AREA SID CODE.
4. PRESS # GI MARK 00
5. PRESS # FIRST P-CH 0333
6. PRESS # SYSTEM A-1
7. PRESS # ACCOLC PUT IN 0 AND THE LAST DIGIT OF THE MOBILE NUMBER
8. PRESS # MIN MARK YES-1
9. PRESS # LOCAL USE YES-1
10. PRESS # EMG NO 000
11. PRESS # FCN STATE 00
12. PRESS # Area Code *
13. PRESS # PROGRAMMING IS COMPLETE
14. PRESS CLR FOR 1-2 seconds SECOND
15. PRESS RCL # 0 2

RCL #24 displays ESN

RCL #02 reboots phone

Editor's note: These commands seem to be similar to those used on the P2/P3.

If you have no RCL key use the MEM key instead