Installing the processor is really simple. Look for the big square usually located near the top of the board, with a bar on the right side. Lift that bar up till it's at a 90 degree angle. place the processor chip in the square. It should slide right into place. If it doesn't, then you need to rotate the chip till it does. Once you have the chip in, push that bar you lifted, back down. That lockes the processor in so it wont fall out. Most processors come with fans, but if it doesn't, you need to get one. To install that, all you do is place that on top on the chip, and have the hooks on either side, then pull the levers down so it will tighen the fan up tight upaginst the processor. Now you have you processor installed. (For any information that you are still unsure of, go to the motherboard user manual.
