This is Bradleys/Strokers friend Scrawny at the race track.
#65 in front
This would be Ash/Blaster giving Pete/Dill an up close and personal view of the sand :)
And this would be Scrawny again showing off his roosting skills in ice. Way to go!
This is Adam/FearThis showing us the proper wheelie etiquette.
And this would be him on the 'Godzilla'. Godzilla is a 99 KX500 with Pro Circuit pipe and silencer, Pro Taper
bars, Pingel guzzler fuel valve, Works Connection frame guards, DID O-Ring
chain, UFO hand guards, twin-air filter, and seperate custom cut radiator
shrouds for dragracing.
And this would be Lethal's 95 Banshee...oh yeah. :) His Mod List Includes: Weisco Power pistons bored .20 over, FMF Fatty Gold Series Torque Plus Pipes, FMF
Turbine Core 2 Spark Arrestors/silencers, K&N Air Filter w/outerwear, Veto's welded power crank, Douglas Race Rims, Spider Trax In The Rear, Stocks In Front,
Barnett Race Clutch, Custom Race Cut Front Plastics.
These are Speedy's babies. The 250R in the front is his bike, 510 Stroker Banshee which he no longer has (sweet huh?), and his wife's FourTrax 250R. His ATC is "a
tired, old, worn out 86 ATC250R". Looks pretty ret ta go to me! hehe His specs include..Frame: 86/Stock, Motor: 86 w/LRD mods, Bore/Stroke: 72mm/76mm,
Clutch/Basket: Barnett 15 plate w/CR500 springs/Hinson Billet basket, Carb: 39 PWK, Air Filter: K&N w/outerwear, Pipe/Silencer: LRD Chrome Adjustabe/LRD,
Suspension: stock, Plastics: stock, Sand tires: 20x10x10 Skat Trak haulers, Swingarm: 85 stock +4, Lights: stock, Gas tank: stock, Fuel he uses: VP C-12, and Misc:
Motion Pro CR twist throttle, and frame/swingarm powdercoated. Nice huh? ;)
This is Roberts/sandmans 14 year old son defying gravity on his *cough cough* Honda. hehe He's a real show off. :)
And this would be Robert riding a sand bowl at glamis, woohoo! *s* Nice picture huh?
This is Brians/Sandsationals 97 Banshee. His engine mods: All engine work done by MP Racing. MP racing modified pipes, full port and polish, shaved re-domed
head, clutch cover mod, lightened flywheel, piston mods, Reed cage mods, clutch basket mods, modified shift star, trued and welded crank, 29mm PWKs, MSD
enhancer ignition, K&N w/outerwear, lots of Cascade goodies, JP +6 swingarm, 10 paddle haulers on the rear, Razors on the front, O'neal 909 handle bars,
and a complete powdercoating.
This is another awesome pic of Brian jumping his Shee, he's a really good rider. Fun to watch because he's so crazy!! :)
Isn't this an awesome picture?? Bobs mods include:Duncan midrange pipes, Fatboy silencers, Wiseco pro-lite pistons .5mm over, head has been cut .005", Boyseen
power reeds, Trinity Stage IV C.V. single carb, K&N air filter w/outerwear, hacked up airbox lid, custom aluminum plate to deflect water from lid snorkel opening,
Works triple rate with res. shocks in front, PEP rebuilt stock rear shock, purple shockwares, full set of Holeshot XCs on Douglas black labels, also Turftamers on
Douglas red labels w/beadlocks, Durablue eliminator axle stock width, LSR parking brake block off plate, 14/40 gearing, DG alloy nerf bars, skid plate, grab bar, Pro
Design teather switch, Moose bars, purple Oury grips, and a hardly used Motofast 2-1 pipe.
I can't remember who sent me this pic, but they're shees! Yea baby
This is Witz catching a little air on his ride.
These are some pics that Randy310R sent me. Some of his friends bikes. This HonZuki is a Quadzilla 500 motor done by RD. It has LRD custom exhaust w/silencer,
it's crammed into an 88 250R frame, it runs roll design +2 a-arms, Works triple rate shocks w/res, Dune Trackers, on the rear it has a custom +4 swingarm, Works rear
shock w/res, Durablue axle, Durablue bearing carrier, and 8 paddle Haulers. Other mods include: DG nerf bars, Fastline braided stainless brake lines, PEP steering
stabilizer, ProTaper bars, and a custom swingarm skidplate.
This is an 89 250R with a LRD 350 kit. Up front it has Lonestar +2 a-arms, WOrks triple rate shocks w/res, Dune Trackers, outback it has a Lonestar +4 swingarm,
Durablue rear axle and carrier, Works rear shock w/res, 8 paddles Haulers, custom swingarm skidplate. Other mods include: braided stainless brake lines, Lonestar anti-
vibration steering stem, Demarini bars, DG nerf bars, a tachometer and exhaust temp. gauge, PEP steering stabilizer, and a Cascade seat cover.
This is an 89 250R with a LRD 330 kit. Up front it has Laeger +2 a-arms, Works w/res, Dune Trackers, rear has a +4 custom swingarm, rear Works shock w/res,
Durablue rear axle and carrier, 8 paddle Haulers. Other mods include: custom grab bar, bumper, tool kit, swingarm protection, exhaust temp. and tach gauge, Renthal
bars, Cascade seat cover. The owner is a welder and makes some trick bumpers and skidplates.
