Chime 1.52 for onHand (http://www.angelfire.com/oh/norbertz/onhand.htm)
By Norbert Zatorski (never_ending@technologist.com)

All comments/suggestions/etc are welcomed.

It is assumed in this document that you are familiar with how to use onHand programs and related terminology.

USAGE
Chime notifies user every hour. More details within the execution and setup configuration details below.

Chime runs automatically after enabled.

ENABLING/DISABLING
Start Chime. Press the MENU button when the "Chime" message appears. It is shown for 2 seconds before automatically enabling.

EXECUTION
At each hour, displays "Chime" message and plays a sound.

SETUP CONFIGURATION
Within onHand's POWER MANAGEMENT, select when to automatically disable/re-enable Chime, in order to conserve battery life and to not be disturbed at specified times. Chime will disable itself at the POWER OFF time setting, and re-enable itself at the POWER ON time setting; the POWER setting does not need to be saved as AUTO TIMER. Note: Chime still needs to be enabled initially.

TIPS
During the notifications, you can quicken the process by pressing buttons other than the MENU button. If you were using your device when Chime started, this allows you to go back to using your device faster.