 |
Solenoid Valve Testing Stand. The Testing Stand is able to test two-way, three-way, normally open and normally closed solenoid valves to direct pressure, back pressure, direct flow rate, back flow rate and direct full vacuum and back full vacuum flow.
It can use a wide variety of test voltages. It has the ability to extend the testing procedures and the test media. It is made out of off-the-shelf products and custom-made parts. This is a 3D view of the 2 testing stations test stand. |
 |
Solenoid Valve Testing Stand. The same testing stand, but on front view. |
 |
Solenoid Valve Testing Stand. Actual image of the Test Stand. |
 |
3-Way Distribution Valve. This valve is used in the hydraulic circuit of the Solenoid Valve Testing Stand as a hydraulic switch. It has an indexing feature made out of a grooved valve drive and a spring setter that stops the knob at the open position on everyone of the three ports. |
