Site hosted by Angelfire.com: Build your free website today!
Exercise Meanings
Bodybuilding & Fitness
Page 1

This list features different exercises and their meanings from the bodybuilding or fitness world, and explains how to complete them. The explanations are from various sources, including bodybuilding and fitness magazines.


  • Barbell Curls (Close Grip):
    First, choose a standard straight barbell, or an EZ-Curl barbell. The EZ-Curl bar will alleviate some strain on the wrists which may accompany this exercise. Stand with your feet about shoulder width apart and your knees slightly bent, holding the bar with a palms under grip.

    In a controlled manner, curl the barbell up to shoulder height. Keep your elbows stainary near your sides. Hold the bar at the top for about half a second and then lower it slowly. Repeart the curl for eight to ten repetitions. As long as it does not hurt your wrists, keep at it.

    There are several ways to hold a barbell. A wide grup that puts more work on the inner biceps head; a standard shoulder width grip that everybody usually does; and a narrower grip that work your biceps more, and also your brachialis and brachioradialis. The brachialis muscle lies just below the biceps and aids in just about any elbow flexion movements (like curls). When it is well developed, it will add to your arm size and shape.

  • Barbell Curls (Standing):
    Standing barbell curls build your biceps, the body's showiest muscle. Start by holding the loaded bar at your waist and curl it to your chest. For full effect, keep your elbows still and squeeze the biceps at the height of the contraction. Use a weight belt or stand against a wall to keep your back straight. Do not forget to breathe. Exhale with the effort.

  • Bench Crunch:
    Lie on the floor on your back, with your feet up on a bench or against a wall for support. (Hands are usually placed at the temples, but placing them on your hips helps make the exercise easier). Lift your head and shoulders up toward your knees while flexing your abs hard and crunching them. Keep your body stationary from the waist down. This exercise works the upper abs.

  • Bench Presses (Barbell):
    Lie flat on a bench with your feet flat on the floor. Grip a barbell slightly wider than shoulder width. Lift the bar off the rack and extend your arms fully above your chest. Lower the bar slowly until it touches you mid-chest. Press the bar back to the starting point. Remember to inhale while lowering the bar and exhale while pressing the bar up.

    Remember, keep your feet on the floor. Do not arch your back. Lower the bar slowly so it does not bounce off your chest. Always train with a partner or spotter in case you get caught with too heavy a weight. Beginner bodybuilders should do 1 or 2 sets, 8 to 10 reps. Advanced bodybuilders can do more.

  • Cable Rows (One Arm) with a Twist:
    Use the lower cable attachment. Place your left foot straight forward and your right foot back 2-3 feet at approxiamately a 45 degree angle to your left foot. Place your left hand on your left knee. Grasp the lower cable handle with your right hand. Extend your arm completely.Your palm should be facing downward.

    Now, pull the weight into your midsection as far as you can. You should end up just above your hipbone. Here is the twist - as you ull the weight into your waist, twist your hand so that your palm is facing upward at the completion of the rep. Lower the weight slowly, resisting as the handle returns to the start.

  • Calf Raise (Standing):
    Stand on a calf-raise machine with your shoulders under the pads. Place the balls of your feet on the foot platform so that your heels are free to move through a full range of motion. Keep your toes pointed straight or slightly out to the sides. Straighten your legs completely and extend your body so that you feet, hips and shoulders are in alignment.

    Lower your heels at a moderate speed until you feel a strong stretch in your Achilles tendon and calf muscles. As you reach the bottom position, inhale slightly more than usual and hold your breath as you push off vigorously to rise as high as possible. Hold the top position for up to two seconds to ensure maximum muscle contraction. Relax slightly, lower your heels under control and exhale.

    Don't pause in the bottom position unless you are trying to increase your ankle flexibility. Don't bend your knees. Don't bounce in the bottom position.

  • Calf Raise (Hack Machine):
    Adjust the shoulder pads on the hack machine to allow you to stand straight facing into the machine. Place the balls of your feet on the upper edge of the foor plate, approxiamately shoulder width apart. Lower your heels to full extension, stretching out your calves completely. Press the weight back up by contracting the calves as hard as possible. Flex hard and feel the muscle 'bite'. Lower the weight down to full extension and repeat.

  • Calf Raise (Leg Press):
    Sit in an incline leg press machine with your glutes and lower back in firm contact with the seat pads. Place the balls of your feet a comfortable width apart at the bottom edge of the resistance platform so that your heels are free to move. Keep your toes pointed straight or slightlt out. Your legs should be straight of very slightly bent but never locked. Grip the machines side handles to stabilize your upper body after your release the platform. Inhale and hold your breath as you extend your feet at a slow to moderate rate of speed through an approxiamate 30-45 degree range of motion. Hold the fully extended position for 1-2 secondsw to maximize the contraction. Exhale as your return under control till you feel a slight stretch in your calves. Pause momentarily and then repeat. To prevent your feet from slipping, wear shoes with good traction and be sure the surface of the resistance platform is not slippery. The balls of your feet should stay in firm contact at all times.

  • Clean & Jerk:
    Stand over a barbell so that your heels are directly under it, feet shoulder width apart. Bend at your knees and waist to reach down and grasp it with an overhand grip, hands slightly wider than shoulder width apart. Keep your back arched as you push down through your heels to begin pulling the bar up. As the bar passes your torso, elevate your traps and bend your wrists back and move your elbows forward. Then press the bar explosively overhead to full extension, pushing off the balls of your feet so that your heels come off the floor slightly. Reverse the movement and repeat.

  • Crunches:
    Your target zone is the Upper Abdominals. Lie on the floor you can put your lower legs up on a bench if you prefer with your knees bent and pointing to the ceiling. This position ensures that your lower back is flat against the floor. Place your hands behind your head and curl your upper torso forward, bringing your rib cage toward your pelvis until you feel a contraction in your abs. Pause for the contraction and slowly return to the starting position. Exhale on the contraction this breathing advice applies to all abdominal exercises.

  • Curls: Reverse Preacher Curls:
    Take a shoulder width overhand grip on a five foot straight bar. Lean over a preacher bench with the top edge of the pad under your armpits and your upper arms hanging down along the pad and slowly straighten your arms. Use forearm and upper arm strength to move the barbell in an arc from the starting position up to a point just beneath your chin. Lower it back to the starting position in a count of four. Inhale as you lower the weight and exhale as you raise it. This exercise helps to stress the forearm supinators, brachialis and biceps.

  • Curls: Seated Dumbell Curls:
    The basic purpose of the seated dumbell curl is to build size and mass in the biceps muscles. Sit on a bench with a back support, arms extended down and a dumbell in each hand. Start with your palms facing inward. Curl one arm (either one) towards your shoulder in an arc. While you are curling upward, your palm should twist so that it first faces out and then faces you at completion of the curl. During the motion, keep your upper arm and body as motionless as possible. There will be some movement, but avoid swinging the dumbell up. Make the biceps work. Lower the weight slowly and repeat the movement with the other arm.

  • Deadlifts:
    Deadlifts, when performed correctly are an incredible overall power exercise that involve more muscles than any other exercise you will come across. They also directly strengthen the lower back muscles .Train with control and form. Too much weight and improper form while performing the deadlift can cause the muscles in the lower back to shorten quickly, causing the ligaments to loosen and the muscles to take on 100% of the weight. This can result in severe pain and muscle spasm.

    Keep your back flat and straight, your head up and start the lift with your legs and glutes driving the bar up. Use your arms as hooks to hold the bar - do not lift with them. Exhale as you ascend with the weight. Keep your knees over your toes when you bend to grip the bar. Keep the bar as close to your body as possible throughout the lift for maximum strength.

  • Deadlifts: Romanian Style:
    This is a power tool of the Olympic weightlifters. It is the drill for huge hamstrings. Start by locking out a conventional deadlift with a lightweight. Use the 'clean', double overhand, palms toward the body, grip. Do not use a belt. Stand upright with a barbell in your hands and your body weight centered on your heels. Look up and inhale so you are staring at the ceiling. Arch your back tightly and slowly force your glutes as far back as possible. We lower the weight by pushing the butt back, not (as in stiff leg deadlifting) by standing erect and bending forward to lower the weight. This is the critical difference.

    The shoulders, more or less, stay over the ankles throughout the lift: the opposite of a stiff legged deadlift, in which the shoulders move forward, out over the toes. As you lower Romanian style, pull back with the hip floxors, the antagonistic muscles of the glutes and humstrings.

    As you are descending, your knees will unlock somewhat. Good! Be sure to keep your shins verticle throughout. Most of the movement will take place at the hip joint, some at the knee and none at the back! Keep jackknifing at the hips until you cannot get any more depth without losing your arch or bending your knees excessively. Stop and reverse to lockout. For most bodybuilders, this level will be no lower than the kneecap.

    Keep the bar very close, both on the up and down; don't let it swing forward and rock you on your toes. Once you have reached the bottom position, reverse the movement by squeezing an imaginary coin with your glutes and digging your heels into the floor.

  • Deadlifts: Stiff Legged:
    Place a barbell on the floor and stand behind it with your shins touching the bar. Bend over, take a shoulder width overgrip on the bar and stand erect. Your arms should be straight and at your sides, with the bar resting across your upper thighs. That is the starting position.

    Stiffen your legs, leaving just the slightest bend at the knees, and keep them that way throughout the set. slowly bend at the waist and lower the barbell until the plates touch the floor, then slowly stand erect again to return to the starting position. Exhale as you bend over and inhale as you return to the starting position.

    For a variation on the basic exercise, you can perform stiff legged deadlifts with two dumbbells instead of a barbell.

  • Dumbbell Lunges (side):
    If we take a normal forward-stepping lunge and convert it to a sidestepping lunge, it will turn from a good thigh exercise (although there are better quadriceps mass builders) to a great adductor exercise.

    Grab a light dumbbell in each hand and stand upright. Your feet should be together. It is helpful if you stand in front of a full length mirror. One leg will act as an anchor. With the other leg, step directly out to the side in a line that runs laterally through both shoulders. Keep the toes on both feet pointing forward. Make sure that as you step to the side that your trunk maintains its upright position. Do not look down at the floor while you are lunging or you will soon find more that your feet are on the floor (the mirror forces you to keep your head and eyes up).

    The foot of your lunging leg should contact the floor in a position that is at least 18 inches wider than your shoulder, but try for more as you get used to the exercise. Bend the knee of the lunging leg and lower you body towards the floor by continuing the bend this knee. Keep the knee straight on the anchor or support leg.

    You should not keep the dumbbell adjacent to your anchor leg, otherwise it will collide with this leg as you drop into the lowest position. Instead, place the dumbbell behind (posterior) to your back and hanging directly below the shoulder. This will keep your shoulder back and prevent you from falling forward with the weight. The dumbbell should be approximately midbody, but in direct line with your shoulder when you are in the down position. The dumbbell on the lunge side can hang straight down from your shoulder throughout the upward and downward movements of your torso without becoming problematic.

    Let the foot of your anchor leg roll towards it medial (big toe) side as you lower your body (don't try to keep the sole of your foot on the floor as you lower the body). In contrast, the sole of the lunging leg should be flat on the floor as you lower your torso. You should feel a stretch in the adductor muscles of the anchor leg during the lowering of the body to the floor. Make the stretch (and therefore the descent of your body) slow and controlled. Never bounce into any stretch, particularly with resistance, unless you would like to invite injury rather than prevent it.

    Your lunging leg should now have a bent knee of 90 degrees (or less in its lowest position). Next, push your body upward with a moderate steady thrust until you have returned to the original standing position. Avoid pushing up with the straight anchor leg, since that is too ballistic for the muscle to handle in a stretched position. You can repeat this procedure also with the other leg.

  • Dumbbell Presses (Incline):
    Set an incline bench at an angle no greater than 30 degrees. With a dumbbell in each hand, lie back on the incline bench. Swing the dumbbells up and hold them at shoulder height, palms facing forward. Press the dumbbells straight up directly above your shoulders. Lower them slowly to the start position. Remember to breath properly, exhaling as you exert pressure and inhaling when you lower the weights.

    Remember to keep your feet on the floor at all times. Control the weights, raising and lowering them slowly without letting them hit at the top. Focus on the muscles being used.




| Page 2 |