My Page On Weed

Drugs to do

• Weed
• Acid
• LSD

Links

tells you how to make "accessories"
A big weed search engine

LEGEALIZE!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

make your own bongs Warning About Aluminum Foil: Aluminum foil is way too thin, and will burn, releasing slightly toxic smoke that you do not want to be inhaling. You can test this by taking a little square piece of foil, and burning it under a lighter, you WILL see smoke rise off. Do you want to inhale that shit? Designs: Regular Water Bong Gravity Bong 2 Chamber Bong

Water Bong Supplies -Gallon Container (like a 1/2 gallon Gatorade bottle or jelly bean container)) -Plastic Tubing -1 foot long brass pipe or aluminum pipe -Knife or Drill (to make holes) -A bowl to smoke out of How to Make Take the gallon size container and make 2 holes in the top of it. One hole must be the diameter of the brass tubing, and the other the diameter of the plastic tubing. Insert the brass tubing down near the bottom of the inside of the container. Now take the plastic tubing (can get from hobby bench or home depot) and stick it through the second hole. Make it so this tube doesn't go more than 2 inches down into the container. Now take a bowl (from a pipe or homemade) and put it on top of the copper pipe. Be creative, you don't only have to use a brass tube, you can modify these designs as much as you want. Procedure Suck from the tube, duh!

Gravity Bong Supplies -2 Liter Bottle or 1/2 gallon gatorade bottle -Bowl/pipe (for smoking) -5 Gallon Bucket How to Make Take the 2 liter bottle and cut the black bottom piece off. Take the bowl, and place it on the top of the two liter bottle, where the cap would be. You can use tape to hold it on. Another method of making the top of the 2 liter bottle into a bowl is using one of your existing glass or brass stems (stems- pipes used for bongs, they don't have curves or bends in them so they can be inserted to smoke straight up or diagonally.) Take the cap of the 2 liter bottle and drill a hole in it that matches the width of your glass/brass stem. Stick the stem into the cap, and screw the cap on. You can strip the inside of the cap, to make it so you can put on, and pull off the cap quickly. Procedure Take the 5 gallon bucket and fill it with water until its about 6 inches to the brim. Now take off the cap of the 2 liter bottle, and put the 2 liter bottle into the bucket until the water fills up 3/4 of the 2 liter bottle. Now put the cap on. Put the lighter up to the bowl, and slowly pull the 2 liter bottle out of the water, but DO NOT PULL IT ALL THE WAY OUT!! This change in air pressure will suck the smoke into the bottle. Now, take off the cap/smoking bowl. Put your mouth up to the opening, and push the bottle down into the water. This will send all the smoke in the bottle, rushing into your lungs (make SURE to inhale!!!). I guarantee you will be on your ass in a second.

2 Chamber Bong Supplies -Two 2 liter bottles, 1/2 gallon gatorade bottles, or gallon size jelly bean containers -Two Pieces of Tubing, 2 two foot piece's -1 Foot of Brass Pipe (1 centimeter in diameter) -A bowl/pipe How to Make Take two jelly bean containers. Drill two holes in the top of each container, making SURE these holes fit the tubing and the copper pipe. These two holes should be on opposing sides of the lid to make sure there is room for everything. Put aside one of the containers, and use the other one for the following the instructions. We'll call this container, "cont1". Take the foot long piece of brass pipe and put it into one of the holes in cont1's lid. Then put in one piece of tubing, making sure it only goes 2 inches past the inside of the lid. Take out the jelly bean container you set out before, we will call this container, cont2. Take the loose tubing from cont1 and insert it into one of the holes in cont2's lid. Make sure the part of the tubing that is in cont2 goes all the way to the bottom of the container, unlike what it does in cont1. Take the other piece of plastic tubing, and stick it in the second hole in cont2, making sure it only goes 2 inches past the inside of the top. Put hot water in cont1, and cold water in cont2. This will cool down the smoke big time, and you will be able to take enormous hits without realizing how much you've taken in. Experiment with different thickness' of tubing, the bigger the tubing, the faster and bigger hits you'll be able to take.

Waterfall Supplies -2 Liter Bottle/ 1/2 gallon gatorade bottle -A pipe/bowl How to Make Drill a hole in the bottom of the 2 liter bottle. Fill a bowl with marijuana and put it on the top of the bottle so that its airtight. This is easiest done by two different methods. One method is to take the cap of the 2 liter bottle your using. Drill a hole in the cap that matches the width of a glass or brass stem you own. Take the glass stem, or the brass stem and stick it into this hole. Procedure Put your finger on the hole at the bottom of the bottle. Take off the bowl on top, and fill the water to about 3 inches from the top with water. Screw back on the bowl/cap.. Put a lighter to the marijuana, and let your finger off the hole. The water will drain out of the hole, sucking air in from the top. This air is fucking filled with incredible amounts of smoke, and fills the bottle. By the time all the water drains out the bottle is so full it turns yellow. You can pass this thing around 5 people at least twice. It cash's huge bowls..