Navikleen Medium is a combination of non-caustic alkaline builders, wetting and dispersing agents. Navikleen Medium suits well for removal of soot, general dirt, road dirt and lighter oil films of all kinds from all materials. Specially suited areas are the superstructures, painted surfaces, car decks, engine room surfaces and tanks from vegetable oils and light petroleum oils. The product is biodegradable.

Navikleen Medium can be used by all traditional manual means, with foam cleaning apparatus, high-pressure sprayers and steam cleaners with following guidelines:

High pressure cleaning :

1-2 % in sprayed water

10-20% depending on the contamination

20% solution hand sprayed followed with HP rinse

Inject 1 lt. per minute in a direct injection mode. In a re-circulation mode prepare a 5% solution. Use temperature between 60-90C.

Technical Data

Form :

Clear to straw color liquid with a soapy odor

Specific weight :

Ca. 1.05

Flash point :

None

pH :

10-11 in 1% solution

Storage :

Warm storage

Stability :

Stable after repeated freeze - thaw cycle

Irritating to skin and mucous membranes. Use appropriate personal protective equipment, rubber gloves, goggles or face shield and protective clothing. Rinse all splashes immediately with plenty water. Seek medical attention if pain persists.