| Back to On-line Product Brochure | |
| chemeast Alubrite Liquid R | |
| PRODUCT INFORMATION | |
| Metal Surface Treatment Product, Strong Acidic LiquidUsed for the removal of unwanted oxides and stains. | |
| Directions for use Use undiluted for normal application. Apply with acid resistant equipment. Can be sprayed or brushed. For aluminium, allow a reaction time of only 1 to 2 minutes. For austenitic stainless steel, allow a reaction time of 15 to 25 minutes, depending on degree of contamination. Do not allow product to dry out on surfaces. In both cases, wash off with plenty of low chloride water until surface completely neutralised. Surfaces soiled by oils and greases will require prior degreasing and rinsing. For extra stubborn stains, re-application may be necessary. |
|
| Important properties | Product is non-flammable. A 1% solution in water has a pH of approx. 1. |
| Safety data | Product is both toxic and corrosive. It contains phosphoric acid, hydrofluoric acid and non-ionic surfactants. Can cause burns on unprotected skin and other tissue. Do not breathe vapours. Do not use in enclosed spaces without ventilation and correct respiratory aids. Always use acid resistant clothing, gloves, goggles and face shield. If product comes into contact with skin or eyes, flush with abundant water and apply calcium gluconate gel on affected area if possible. Where burns occur, seek medical advice. Store in safe, suitable, well ventilated and corrosion proof area. Dispose of according to prevailing regulations. |
| MTT Home | Back to On-line Product Brochure |
