SIXGRAPH COMPUTING LTD.

9000VL

Category                    Video
Video Types Supported       XVGA
Video Processor             Weitek
Highest Resolution          1280 x 1024
Supported
Data Bus Type               VESA local bus
Memory Type                 VRAM
Maximum Onboard Memory      2MB

[Image]

                                CONNECTIONS

       Purpose          Location            Purpose            Location

  15 pin analog            CN1        VESA Feature                CN2
  video port                          connector

                             BUS WIDTH SELECT

               Bus Width                               SW1/1

  »                 8-bit                               On

                   16-bit                               Off

            Note:If switch 1 is placed in the Off position, then switch 3
            must be on. If switch 1 is on, then switch 3 must be in the
            Off position.

                      VIDEO BIOS WIDTH CONFIGURATION

                 Setting                               SW1/2

  »             8 bit access                            Off

                16-bit access                           On

                          ZERO WAIT STATE SELECT

                 Setting                               SW1/4

  »        Zero Wait State disabled                     Off

           Zero Wait State enabled                       On

                          VIDEO INTERRUPT SELECT

                  IRQ9                                 SW1/5

  »                Enabled                               On

                   Disabled                             Off

                  HIGH MEMORY BASE ADDRESS CONFIGURATION

            Address                    SW1/6                 SW1/7

  »          C0000000h                  On                    On

             D0000000h                  On                    Off

             E0000000h                  Off                   On

             F0000000h                  Off                   Off

           FACTORY CONFIGURED SETTINGS

         Switch                  Setting

         SW1/8                     N/A

  Note:This switch is reserved for future use.