PURE DATA LTD.

PDI508PLUS-T

NIC Type      ARCnet
Transfer Rate 2.5Mbps
Data Bus      8-bit ISA
Topology      Linear Bus
Wiring Type   Shielded/Unshielded twisted pair
Boot ROM      Available

[Image]

                        CONFIGURATION MEMORY CLEAR

                 Setting                                JP1

  »            Normal operation                         Open

                 Clear memory                          Closed

  Note: When JP1 is closed all card addresses and settings are cleared
  from memory.

                             INTERRUPT REQUEST

       IRQ               JP2A               JP2B               JP2C

  »        5            Closed              Open               Open

           6             Open              Closed              Open

           7             Open               Open              Closed

                           TIMEOUT CONFIGURATION

    Response Time      Reconfiguration Time       JP3            JP4

  »       74.7µs              840µs               Open           Open

         283.4µs              1680µs              Open          Closed

         561.8µs              1680µs             Closed          Open

         1118.6µs             1680µs             Closed         Closed

                              CARDS INSTALLED

  Card number        JP5A          JP5B           JP5C           JP5D

  »       1          Open          Open           Open          Closed

          2          Open          Open          Closed          Open

          3          Open         Closed          Open           Open

          4         Closed         Open           Open           Open

  Note:If there is only one NIC installed in a system, set this option to
  the "1" position. If this NIC is the second

                             DIAGNOSTIC LED(S)

     LED         Color          Status                 Condition

    LED1          Red        On/Blinking       I/O bus activity detected

    LED1          Red            Off              No I/O bus activity
                                                       detected

    LED2         Green            On           Network activity detected

    LED2         Green           Off              No network activity
                                              detected or bad connection

                            MISCELLANEOUS NOTES

  Software that is supplied with the card must be run in order to fully
  configure the card.