Site hosted by Angelfire.com: Build your free website today!

Classified Ads

Please feel free to send you for sale/wanted ads to us to post on our page. Send to Please mark as a Classified Ad in Subject of email message. Thanks.

Plesae be careful of Overseas scam with emails. MKC is not responsible for items for sale or wanted.

  • (10-3) 1998 Swiss-Hutless KT100 Jr. Can kart with full CIK body work and Lexan belly pan. Raced only '99 & 2000 at South Bend and Ravenna Motor Park. This is a complete package and has absolutely everything you need to get started - all the basics (kart, stand, starter) plus all the goodies and extras - a MyChron EGT/tach, new tires, an extra carb, carburetor setup tools, a dozen quarts of oil, a big stack of sprockets. The Yellowfin engine probably needs a crank half - it was damaged by an overenthusiasic buddy. It hasn't raced for four seasons but the driver finally decided she she's not going to race anymore. This kart appeared in the Jan 2000 National Kart News article "Little Things Mean a Lot". See everything at http://www.alloyresearch.com/kart/page_01.htm
    Bring $2000 to Kalamazoo and you'll be racing next season! David Chamberlain

  • (8-28) Birel 2000 chassis (R932), red bodywork, Freeline axle/brks/rims. L&T wet 3 disk clutch, Profile third bearing Mount. New in 2003 :Yamaha 100cc, just broke in, Stock :Calibra Seat XXL : Digitron DT-46k : Custom rolling kart stand (BLK), Also includes Starter, some misc parts. Bought for wife late last summer, used 4 times (practices only). Can email pics..$1900.00 ( possible trade for ATV) Email

  • (6-16) 2001 Coyote Wide Track LE $1,200.00 OBO - Complete Roller, just add your choice of motor. Excellent condition, only raced 6 times. It has sat for most of it's life so it's in great condition, and extremely clean. When raced it was cleaned every time it came off the track. I highly doubt that you will find one any cleaner. Lots of upgrades and some extra parts as well. It has also been scaled and balanced. Includes the following: Caliba Steering Wheel, Digitron DT-32 Gauge, New Axle Bearings, New Throttle Cable, White CIK Bodywork, Xtra Set of Nerf Bars, Xtra set of Hubs, Burris Motor Mount + Third Bearing, Practice Set of Tires & Wheels, Aluminum Gas Tank, and a few other things I'm probably forgetting. The seat has been drilled for mounting weights, but is still in good condition. This kart is fully adjustable with a rear torsion bar, sliding seat with struts, castor adjustment, etc. It will work great in just about any class from Junior Sportsman, to Senior Yamaha, to any Briggs Class as well. Just add a motor and clutch and you're ready for the track. This kart is located in Indpls., IN, and I will deliver for a minimal charge (gas + $50.00) within 2 hours of here. For pictures of this kart please go to: www.somethingwickedracing.com/4sale.htm. Feel free to contact me with any question via Email or call 317-246-1236

  • (6-16) 2003 Birel cr32s new style pods with Pavesi ICC , fresh motor completely rebuilt raced 3 times. $5500 Troy Brown 248-613-5839

  • (6-16) Mid 90's coyote wide track rolling chassis. Won Mid Ohio race in Oct. Good for long and short road courses. Bolt the motor and tach on and race! Nice kart $450 OBO + shipping. Email me for pictures if interested. Email

  • (6-7) GO KART WITH 5HP BRIGGS AND STRATTON GREAT CONDITION COMES WITH 4 EXTRA RIMS AND TIRES AND SOME SPARE PARTS. ALSO COMES WITH THE KART STAND. RACE READY 1000.00 OBO I ALSO HAVE A YOUTH NECK BRACE MEDIUM USED ONCE 22.00 SNELL M2000 VEGA FULL FACED HELMET 100.00 ADULT XS RIBVEST 30.00 YOUTH KART GLOVES SIZE SMALL 22.00 KARTING SUIT SIZE 40 YOUTH 10-12 14-16 60.00 I YOU HAVE ANY QUESTIONS PLEASE Email OR CALL 231-894-6249 AND SPEAK TO ADAM OR RACHEL

  • (6-7) ‘99 Cyclone enduro shifter. This kart was custom designed and built by Rich Cervone for enduro tracks - driver and radiator sit much lower than sprint track shifters. ‘99 CR125 RS, Boysen bottom end & reeds, cylinder by Woltjer racing, dual pump fuel system, MCP m/c just rebuilt, just rebuilt front & rear wilwood dynalite calipers, 600+ wilwood fluid in system, fresh Ripley rear rotor. Butterfly shifter on steering wheel. Digatron DT34 with h2o, exh, tach & speedo. 3 sets of wheels & tires (2x5in. and 1x6in.), 1 race on MG yellows. Spares include a set of new uncut side panels as well as RS rings, gaskets, gears, bearings, hubs, jet assmt., etc. Includes custom built roll around stand and starter. This kart is currently set up with enduro sprint bodywork, but with minor mods to nerf bars, can run CIK. Very fast and stops incredibly well. $3700 obo. 540-428-7222. Email. I have been told that this frame will accept a 250 motor. If you’re interested in that, contact me and I’ll confirm it. See Pictures

  • (5-13) 2003 PCR/Pavesi Red Rocket. This kart is complete and ready to be taken to the track. The engine had a new piston, ring and lower bearing replaced over the winter and has two practices on it since. I do have pictures I can send. I also have multiple sets of used YHC tires I will include. The chassis is in excellent condition, with normal wear from racing. Comes with spare axle gears, engine gear and various carb tuning parts. The bodywork was new two practices ago. It also has a set of caster/camber pills for adjustment..Will consider delivery/meeting within a reasonable distance. Please email me with any questions or call Mike at 414-526-7674 or Email $4,200.00

  • (5-4) 2001 Roller Top Kart Surf model for 125 shifter, road raced only good condition $1000 Troy Brown 248-613-5839

  • (4-19) 2002 GP5 with Leading Edge CR125. 2 of the best in the business in one package ready to run. 2002 GP5 (Factory Fury Kart), 0 Races in 2003, Large GP Seat, Flat Top GP Steering Wheel, Large Champion Rad with AIM H2o Sensor, 40mm Medium Axle, Leading Edge Motorsports cr125, 0 hours in 03, Had the motor build and never turned a lap this year, CTS Motor Mount, RLV-B4 Exhaust RS Piston & Mods, V-Force Reed Cage, Stock Ignition, Mikuni TM Carb (not pump around), 16 Front Gear, 22,23,26,27,28,29 Rear Gears, (Electronics are not included). Looking for the first $3800, pics available e-mail me at kalvin@8120performance.com or on AIM at kal8120. Kart is located in Indianapolis, Indiana. Kevin "kalvin" Hurst, http://www.midwestkarting.com

  • (4-11) 2003 GOLD RACING KART NEW 100CC MOTOR NEW TRULLI SEAT GRAPHIC KIT TO. HAS NEW HORSTMAN STEEL NYTRO CLUTCH. THIS KART IS MADE TO RUN 50 TO 70 MPH NOT A KID CART KART ONLY BEEN RACE ONE TIME. TO FAST FOR ME. THIS KART WILL SEAT SOMEONE 5/6 TO 6/1 AND UP TO 225LBS. HAVE LOTS OF EX. PARTS TO GO WITH SELL OF KART. I HAVE $6900.00 IN KART WILL SELL FOR $6295.00 OR BEST OFFER CAN CALL ME AT 314-839-4761 OR MY Email

  • (4-11) 1999 Dominator 125 laydown. Rotax 130 Digital / Cassette Gearbox, S&G Carb. and Pipe. Bootes personal Kart. Won Daytona twice, and a few IKF nationals. Low hours. It has a C/F undertray and fresh paint. Starter, gears, wheels and tires. This is a top notch Kart, professionally built and maintained. Ready to race. $3200.00
    1987 Gibson 250 laydown. Rotax 244 rotary valve. Only 6 races on new engine, S&G pipe, Dellorto Carb, Digitron DT34K, New Concept Body w/ wing. Kelgate Brakes One piece VanK's. This Kart won Road America and Gingerman in 02, second in points in MSSS. Spare wheels, gears, clutch, ignition, pipe. Totally updated and ready to race. Could be converted to a 125 if desired. $1700.00
    Take them both for $4500.00 Two guys could have a blast, and race different classes.
    2002 KZ camper / race hauler. Coyote Sportster Model , 22 ft with pop out king bed in front and a fold down king in rear. Hauls two karts or bikes with ease. Has all the comforts of a high end travel trailer. Full bathroom with tub, Big Fridge, Microwave, Stereo w/ CD player, stove, oven, outside cook center, outside shower, four stabilizers, and lots of storage. Custom tire racks. Less than #3700 empty. This is perfect for a racing family. $12,000.00
    Whole package for $16,000
    Shawn Menzel 517-294-3133 cell

  • (4-7) 98 margay brava 1. 80% rebuilt, but needs completion. All new parts very sharp! Priced to sell quick. Need to move out of garage so I can work on formula 500. $650 obo. Contact Email
  • (3-23) 97 Trick SC rolling chassis. The Kart is equipped with wet cassettes, adjustible camber/castor, deluxe steering wheel, Enginetic brakes, and pedal grips. Less than 20 races on the chassis, Front spindle and wheel bearings are only a couple races old. Includes 7.5" and 8" wide rims (with VanKPro seal kit installed) and steering support shafts with bearings. Excellent 4 stroke starter kart. I purchased a new(er) metric chassis, so kart comes with my track side "spare parts". Asking $600. Add the engine package of your choice and it's ready to race. Pictures at: http://public.fotki.com/eyeteeth/karting/for_sale

  • (3-23) Complete Honda 125 motor package. Full blue-print. Cylinder,cylinder head, cases matched, VForce reed cage, RLV pipe,M4 silencer, blue-printed carb,Vortex programmable ignition and motor mount. Motor has 12 races total. 100% complete ready to go. $2700.00 + shipping, Sean Mossgrove Email

  • (3-13) For sale "00" TOPKART cadet chassis (roller) 30mm axle, hydraulic brake, yamaha mount, tillet full padded seat, suede 12" steering wheel, new body work $800.00 mike busch, st. charles, il 630-584-6635 Email

  • (2-23) New Style Comer K80. Engine was broken in on Dyno and has been raced only 1 time (2nd place) and driven about 50 laps since it was freshly blueprinted by TNR Kartsports of California. This motor is very fast and is IKF and WKA Legal. Carb has been completely blueprinted by E.C. Tillotson. Starter Nut included. Need to buy an HPV for my son. First $800.00 takes it. Carl Ackermann 714-767-4391 Email

  • (2-10) Have a complete Vortex ROK TaG motor package available. Kit includes: motor, carb, pipe, silencer, battery, battery charger, electronics, radiator, hoses and clamps. This package is NEW - never started .... switching to shifters - MUST SELL ASAP. Paid $2295.00 + $45.00 shipping - make an reasonable offer. Sean Mossgrove 616-308-3292 Email

  • (1-11) * 2002 Top Kart Surf - 1 race and a couple of practice - $1,700 * 2003 Biesse - 1 race and some practice - $1,600 * 2003 Jon Nevoso - $1,500 * 2002 Jon Nevoso - $1,500 * 2001 CRG Kali w/dual rear brake calipers - $1,500 * 2001 Mike Wilson 6 - use for practice only (my cousin is not positive it is a 6, but he was 90% sure and I can go over his house and look if you are interested) - $1,400 * 2001 CRG Blue Demon w/dual rear brake calipers - $1,400 * 2000 CRG Heron - $1,300 * 2000 CRG Heron - $1,300 * 2001 CRG Kali converted to Shifter w/new 2002 bodywork and decals w/Freshened Pavesi FC 125cc shifter motor, carb, & pipe NEW PARTS: (need fuel, waterpump, pulley, silencer and chain) - $3,200 * 2000 Birel - $1,200 I also have available, but not yet in stock: New 2002 Biesse Chassis 100cc $1,600 New 2002 Biesse Chassis 100cc $1,600 2003 Biesse - 2 races and some practice - $1,600 2003 Biesse - several races and practice - $1,600 2003 Biesse - several races and practice - $1,600 I also have available, but not yet in stock: ICA race package, including shipping - $4,500 3 used 2003 Parilla ICA Reed Jet engines 2 used Carburetors 2 used sets of water pumps and radiators 2 used pipes with flex I have a variety of KT100 engines for sale from needing rebuild to NEW blue-printed from RaceTec. Todd Jones 734-254-0284 http://www.myriadminds.com/mmracing/forsale_used.htm

  • (1-8) Complete Swedetech Honda 125cc motor package. Built and all mods done by Swedetech Racing. Motor, RLV pipe, silencer, Speed Concepts programmable ignition, custom Swedetech intake block and reeds, 38mm carb, and JARM. Motor is fresh both top and bottom. $3500.00 + shipping. Sean Mossgrove 616-308-3292 Email

  • (1-2) FOR SALE – Lynn Competition sprint chassis (similar to Emmick Top Gun). MCP front brakes with 2 master cylinders and 2 brake bias controls ($600 new). Front brakes required for 2004. Additional chassis stiffening for better handling. Full ABS floor pan. New steering wheel and seat, new red Stallion nose and side panels. Won team race championship 4 consecutive years and had high finishes in individual races in Championship Enduro and Mid-States series by Jerry and Gerald Revely. Asking $1200. Call Gerald at 630-980-8936 or Email for more info including pictures. Please, no foreign sales. Foreign requests will not be answered.

  • (12-29) 2001 CRG Maximo rolling chassis. 40mm axle / aluminum wheels / tires / CRG rear brake system / padded seat. Great chassis for Rotax Max / TAG / HPV / KT100. Chassis is straight / clean with new plastic. $1100.00 + shipping (o.b.o) Call or write for more details / pics. Sean Mossgrove 616-308-3292 Email

  • (12-23) 01 Italkart Supersonic w/ 98 TM Moto lots of spares. $4000, KT100 Buller Blueprint $500. For more information visit: http://home.midsouth.rr.com/carlcottrell/ Or Email

  • (12-12) For Sale brand new 02 Emmick Top Gun rolling chassis; was $2,400. now cut down to $1,700. Ready to race prep available... Front runner For Sale 02 Emmick Top Gun w/full Stallion Thunder Bolt bodywork, including inner fenders, M-L Stallion seat & full aluminum floor pan. Has only ran in 11 races & has 2 race wins, never been crashed, never been bent. this is a great deal don't pass it up $2,000. NO OVERSEAS SALES Call (847) 366-5374 or Email

  • (12-8) Digatron TACH/CHT Datalogger $200 Plus shipping here is a pic Digatron DT 32K $150 Plus shipping Here is a pic Like new 2 cycle piston pin remover, comes with piston holder $30.00 Plus shipping Here is a pic Now you do not need another person to help put the kart on the stand. When not in use it folds flat, a little more than an inch tall. It's 4 years old. Doesn't ship well, so ..... LOCAL PICKUP ONLY. DFW area. $70.00. Buller built twin tilly 360 carb, sweet setup, comes with IAME reed cage and carb adapter. Only ran this carb once before getting out of karting. Lots of big end power, smooth out of corner acceleration. $300 Can be seen @ Also have blueprinted Tilly HR191G carb $150, list without a BP is $150. Longacre air density gauge, A MUST HAVE ENGINE TUNING TOOL like new $60.00. Longacre Castor/Camber Gauge with 5/8" kart spindle adaptor easily adjust your castor and camber with this gauge only used a couple of times, like new $100.00. Horstman 1.25 axle clutch old style external adjusters ready to run just add oil $150. AMB transponder with charger $150. Lead ballast $1.00 per lb. I have over 50lb.s for local DFW pick up only too expensive to ship. Mostly 5 lb chunks. Will consider all reasonable offers and package deals. Rick Baker Rick Baker Prefer PAYPAL or ship UPS c.o.d.

  • (12-6) Haase Mizar 125cc shifter package for sale. Haase Mizar chassis has 3 race weekends on it. Kart is complete and ready to race with 125cc Honda engine built by CKT. Engine has 3 race weekends on it since being completely rebuilt and blueprinted. RLV B4 pipe, M4 silencer. Freeline large radiator. CIK bodywork is in great shape and has Haase factory sticker kit on it. 40mm axle. I will supply any seat size you want. This kart package has very little time on it. Asking $4500 for complete package. I could also put this together as an ICC package, call for details. 262-628-9009 or Email with your questions.

  • (11-21) Complete Vortex ICC motor package. Motor has less than 5 hours of running time. No races, only practice days. Motor, mount, pipe, silencer, carb, airbox, ignition, water pump, pullies and belt. Runs great. Boxed up and ready to ship to your front door. $2700.00 + shipping.
    Complete DDR-Banke built Honda motor pkg. Motor is fresh with one race on new top end. RLV B4 pipe, M4 silencer, Speed concepts ignition,VForce reed cage /reeds all mods to both cases/ cylinder/cylinder head/o-ring head, pump around fuel system, keihn carb. Motor is fast ....$3500.00 + shipping
    Complete Banke built Honda motor pkg. Motor has new top end, RLV pipe, RLV silencer, blue-printed cylinder/cylinder head, o-ring cylinder head,matched cases with straight intake with VForce reed cage, Keihn carb. $2500.00 + shipping
    Sean Mossgrove

  • (11-19) WANTED .. RotaxMax Kart packages. If you are serious seller for your RotaxMax kart package…….. I am serious buyer. (With references available from past RotaxMax kart package purchases.) E-mail me with a complete list of what you have, with pictures. Include in the list all of the extras that come with the sale. Such as; tires, wheels, axles, hubs, gears, chain, jets, Micron, seats, pods, graphics packages .. EVERYTHING …. with details. Complete validated history on the engine is a must, history on the kart is a must. And you must include the seal and passport number. Which I will verify with SSC. Rick Crist

  • (11-19) John Deis Yamaha 1 race old since freshened, 52.30 and another 5 races since freshened, 52.10. Both complete with airbox, filter, chainguard, carb. Also a spare BP carb. 7 headers and 4 pipes. 1 fresh 4 disc steel nytro and 2 fresh 3 disc steel nytros, and 1 five race old 3 disc nytro. 10 and 11 tooth drivers. Lot of spare discs and floaters. Also a couple of Odenthal mounts for 32mm dia. by 125mm spacing. Email or call 937-376-9046 for details

  • (11-18) For Sale brand new 02 Emmick Top Gun rolling chassis; was $2,400. now cut down to $1,700. Ready to race prep available. Front runner For Sale 02 Emmick Top Gun w/full Stallion Thunder Bolt bodywork, including inner fenders, M-L Stallion seat & full aluminum floor pan. Has only ran in 11 races & has 2 race wins, never been crashed, never been bent. this is a great deal don't pass it up $2,000. Call (847) 366-5374 or Email

  • (11-12) WOLTJER CR80, 2001 Woltjer CR80, Mikuni 28mm Flat Slide Single Feed + Main Jets 160-230, K&N Filter, Vortex Performance Ignition, RLV B Series Pipe, RCE Titanium Silencer 12'', 16 & 17 Tooth Drive Sprockets, Motor Mount & J Shaft, 16X8 Champion Radiator with mount, Fresh Top End Rebuild, 2002 National Champ, All Podiums In 2003. Race Ready, Just Bolt On And Go! $2400.00 - OBO Call: 330-699-1102

  • (11-12) 2002 CRG Premiere Road Rebel. Chassis built new in 01-03. Chassis has four race weekends. Very clean, 50mm rear axle asm,2000 up brake system, CRG steering wheel, CRG seat, CRG factory graphic kit, magnesium wheels, removable torsion bars front and rear. $2700.00 + shipping
    2002 Tonykart Mitox. Chassis built new 01-03. Chassis has one race weekend with a handful of practice days. Very clean, 50mm rear axle asm, Tonykart steering wheel, Tonykart graphic kit, removable torsion bar and magnesium wheels. $2600.00 + shipping
    2002 Trulli J2. Chassis built new 01-03. Chassis has NO races, very clean. Used for practice days only. 50mm rear axle asm, magnesium wheels, JM racing graphic kit, Trulli steering wheel, removable torsion bar. $2500.00 + shipping. Can ship to your front door. Call or write for more details / pics. Sean Mossgrove 616-308-3292 Email

  • (10-31) 2000 TopKart Magnum chassis, fresh Yamaha, mounted rains, spares, starter, stand, great condition, $3,000.00 must sell Call Tom 616-554-0467 MI. Mongoose chassis, great kids kart, fresh Yamaha, small carb, gear sets, tires (lots), $1,800.00 must sell Call Tom 616-554-0467 MI

  • (10-31) CRG Racing Kart - Yamaha KT-100. This kart WON the 2002 Long Island Championship Series and is a consistent. Pole-sitter and race Winner! Kart was completely torn down in the spring and rebuilt in preparation for this season, but time did not permit much racing. As a result, has only 2 races (verify driver Marco Silva -http://www.longislandkartingassociation.com/lika_club_points_2003.htm) since being completely Rebuilt and Blueprinted by Emmick (invoice & dyno sheet included). Includes 4-hole can; K&N filter with Quick-Release clamp; Horstman HDC-3 dry clutch; NEW 40mm Axle; NEW 115mm Hubs; All NEW NTN bearings with Removable Shields for easy cleaning/lubricating; NEW Spindles; Adjustable Camber/Caster; NEW Bridgestone tires; Padded Tillet seat, Suede wheel, custom brackets for shifter-style bodywork. $2,700 o/b/o. This PROVEN WINNER is in excellent condition and ready to race immediately! PHOTOS: http://groups.msn.com/CRGKart/shoebox.msnw Call Marco: 516-294-1254 or Email Also Available: My-Chron2 computer/lap timer w/ beacon, CHT, EGT, wheel speed, download pen & software; L&T Mini clutch; 3-hole can; 62mm hubs; carburetor rebuild parts; spare wheels/tires; various clutch tools; starter w/ battery, etc.

  • (10-29) For sale, 02 Haase Mizar w/ body kit & rear bar . 2 Yamaha KT100's , one bought in June 02 and will be fresh , the other a older back up with 1 sprint race weekend on it . Also a engine mounts and third bearing support and high speed adjuster . L2&A2 pipes w/ several exh. headers & all the flex pipes you'll need. 2 steel nitro clutches in good condition w/ all related clutch tools . 10, 11 & 15 driver gears & 15 different axle gears & a bunch of 219 chain & chain brake tool. Spear wheels & tires YDS & YHC Bridgstones. Starter w/ battery & stand . Asking $3,500 . Call Curt Sriver @ 1(847)680-1267 or Email

  • (10-27) WOLTJER CR80, 2002 NATIONAL CHAMP, ALL PODIUMS IN 2003. FRESH TOP END REBUILD. RACE READY. JUST BOLT ON AND GO! 2002 WOLTJER CR80, MIKUNI 28MM FLAT SLIDE SINGLE FEED CARB. + 160-230 MAIN JETS, K&N FILTER,VORTEX PERFORMANCE IGNITION, RLV B SERIES PIPE, RCE 12" TITANIUM SILENCER, 16&17 TOOTH DRIVE SPROCKETS, MOTOR MOUNT & J SHAFT. $2800. CALL Bryan at 330-699-1102

  • (10-25) MUST SELL - son wants to race next yr. 2001/2002 Mike Wilson - Mike 4 ROLLER. Practically new, only 5 races on it. Set up for Stock medium. 40mm axle with metric hubs adjustable camber/castor/ride height. Extra set of 6" blue anodized wheels & tires. CIK bodywork painted color-changing blue. Medium sit-up style seat with cover. 1 set of short rear hubs and 1 set of extended hubs. Mike Wilson factory suit size M 5'x9' semi-enclosed trailer (2 kart capacity). All that's needed is Motor and a driver! $800 OR trade for kid kart (50cc). Other trades considered - looking for Longacre scales with table. Baker Racing Engines: WKA spec - Gold plate motor, .010 over(per Steve Baker) 2 races since last freshened. Baker's serial # 041201 Fast & Strong - Former Henry Motorsports motor $700.00 - OBO + shipping. Steven "Aardy" Pfeifer, Aardvark Engineering Motorsports Ins. http://www.geocities.com/aardy_54 http://pub207.ezboard.com/bbuckeyekartracing

  • (10-23) MCP Sprint front brake set. Hubs, roters and calipers all in good condition - $175. KT100 Yamaha blueprinted by Fox Valley. Less than 1 hour run time - $550. White LH rolling chassis with 38" New Concept badywork, full bellypan and Lightening Lite XL seat - $250. Mike

  • (10-16) 2002 Swedetech CR250 Engine "Package", Supetech, Cryo, Fresh Vertex Piston, 5 hrs. on New crank. Keihin 39PWM PSR pump thru with Mastertune and fuel pumps. RCE X-2 pipe, (custom under pod) Tit. Silencer, mounts. Complete w/ STOCK Ignition and Power Valve servo, WKA Legal. As raced and won in both WKA nationals, World Supekart, and Mid States. Six WINS, Two Second's this season. $3400 plus shipping. Shawn Menzel, 517-294-3133 cell or Email

  • (10-16) 2003 CRG Road Rebel premiere chassis with FR 125 Sr. Rotax Max motor package including passport and seal. Both chassis and motor have 5 races. Complete package including 50mm axle, magnesium wheels w/ bead locks,Brembo brakes, CRG steering wheel,CRG graphic kit, removable torsion bars and more... Kart is very clean and proffessionally maintained. $3900.00 + shipping. Call or write for more details - pics.
    Sean Mossgrove, 616-308-3292, Email

  • (9-29) wanted tkm bt82 motors any condition also walbro wb19 carbs with marking mo on side mail or phone /fax +44 1322 279429 Email tony cruttenden england

  • (9-24) 2001 Birel CR32 Motorsport Edition, 2 races old, never wrecked, or bent. 1998 TM engine blueprinted. New piston/nikasil. Custom hydraulic clutch. Two carbs (39mm and 36mm). 4 pipes, two stock. 3 silencers 2 stock, 1 carbon fiber Dog Boy. Deep Seat. Extra set of mag wheels. 3 axle gears. 2 engine gears. Extra radiator. Two stands, track and vertical. Asking $3,000. Contact: Chris Moore @ 319.360.0856 or Email

  • (9-24) 2003 Woltjer Comer K80. Son is moving up. buy now and save over the price of new ! $ 1000 motor mount included ( Free shipping )
    Scott Mitchell Email 913-269-0071

  • (9-14) For Sale 1999 M X K Demon II, modified for enduro. Adjustable castor & ride height. Brakes, M C P rears & Heger fronts. FRESH Yamaha buy T.C.T. with L4 pipe & high speed header. S M C axle clutch, rebuilt buy Pudge Eng. clutch has only been run at Road America & Balckhawk Farm. New concept design sprint enduro seat & body with Radical I nose. MOMO steering wheel. Black Lansing wheels with SL 4 tires, 2 belts, extra gears, rear wheels, tires ,wheel balancer , front brake shims & rear brake pads. ASKING $3,000. Call Curt Sriver @ 1 847 680 1267 or Email

  • (9-1) Complete Champion Racing/Interkart 125cc Shifter Operation Work demands and a return to grad school force me to get out of the driver's seat. Excellent performing package - 2002 SWRA Spring Nats win and Top 10 finishes at Road America, IKF Grands and Mid Ohio WKA 2 Champion Racing, Brett Berryhill built CR125 engines, both have: o-ring head and full mods by Champion Racing of Norman OK, RS intake and V-force reeds 2 Champion raidators, 1 large and 1 medium with 2 billet mounts 2 vortex PIs and 1 stock box, 2 coils 3 RCE pipes and 2 M4 titanium silencers with RLV silencer mounts, plus 1 round Dog Boy silencer 2 PSR engine mounts and 2 PSR J arm levers 2 complete PSR pump-around set-ups, with 2 carbs - 1 Mikuni carb modified for the pump-around and 1 PSI BIG AIR carb also modified. The PSI carb performs exactly like the Keihin, but I like it because the needle/dial adjustability lets you NAIL the jetting and do it quickly. Also have 2 standard fuel pumps and 1 standard Keihin carb spare jets and needles for the Keihins My "regular" race engine has dyno'd very well and has an extremely broad powerband. I feel I have never lacked for power, especially on the longtracks. Have less than 5 hours on new crank/bottom end, also have an extra crank in good condition. Will sell with a freshened cylinder, head and piston/ring. I kept the 2nd engine as a spare and it has very low hours. 2002 Interkart Elite (compatible with SKM, Italkart, Hammer and all others from the SKM family) never sprinted or bent 32mm rails with removable side bar and rear torsion bar SKM components Champion driver fairing - fiberglass fresh axle bearings Mychron 2 MG tires on 5" black Douglas AL wheels plastic road race floorpan inside frame rails and back to axle Deepseat, with extra struts Regina chain 2001 Interkart Elite fresh metalic blue powder coated frame, same geometry as the 2002. can keep as a spare frame, but have all SKM components to reassemble for a 2nd rolling chassis 428 Gears - drivers 15-19, axle gears 22-29 medium and stiff SKM axles spare MG tires and Mag wheels, with bead lock 1 set rain wheels and tires extra material to make 2 more floor pans Spare CIK fairings, nose and pods spare hubs, steering shaft and other misc spares and bits Put it all together and you can have a FAST 2 kart operation at a great price. Willing to sacrifice - $7,000 takes it all. I don't mind driving and can deliver/meet part way. Please call 580-657-6702 or Email , pictures available

  • (8-20) Cleaning out garage to get rid of unused parts and preparing for 2004 racing season. Most prices are flexible so feel free to make an offer. Shipping and Handling not included in prices. Be sure to visit http://www.kessingerkarting.com for more information and pictures of all items posted. (1) Corsa Racing Kart - 32mm Frame. Bought new for 2002 season. Never wrecked and in excellent condition. Finished 3rd in Mid-State Kart Club Yamaha Sr. SSX class in 2002 and currently leading points at Mid-State and in the I-55 Series. Comes with black CIK bodywork, Seat, Corsa rims, and set of used YHC tires (4.50 front, 7.10 rear). $1250 Add a spare set of Corsa Rims for only $100. Not even two years old and still look brand new. Wheels include bead locks. This set of wheels costs $175 new. (1) 100cc Yamaha Motor - Completely rebuilt over winter and very little time since top end rebuild and fresh carb kit. Never stuck or damaged. $750 (1) L&T Clutch - 3 disk-4 Spring Wet Clutch. Very few laps since complete rebuild. $200 Corsa Chassis and 100cc Yamaha Package - $1950 ($50 Savings) Corsa Chassis and Clutch Package - $1400 ($50 Savings) Corsa Chassis, 100cc Yamaha, and Clutch Package - $2100 ($100 Savings) 100cc Yamaha Motor and L&T Clutch Package - $900 ($50 Savings) 5" Douglas Wheels - Many American style wheels from previous chassis. All wheels are used but in great condition. Drilled for 5/16" bolt pattern. (2) 7 3/4 rear wheels (2) 7 1/4 rear wheels (1) 6 1/2 rear wheel $15 per wheel or $25 pair (2) 1 1/4 Rear Axle Bearings - Still turn smoothly. $10 for both (2) 1 1/4 Extended Rear Hubs - Used but in like new Condition. Made for 1/4" or 5/16" studs. $20 (1) 1 1/4 Gear Hub - Good condition. $10 (2) 1 1/4 Steel Axle Collars - Like New Condition. $5 for both All 1 1/4 Axle Parts Package - 2 bearings, extended rear hubs, gear hub, and 2 steel collars $40 ($5 Savings) (1) Black Packer Toolbox - 54" Long X 22" Wide X 19" Tall. Used for transporting karting equipment in utility trailer. Garage kept and in excellent condition. $80 (1) Scissor Stand - 34" tall when unfolded. $50 (1) Kart Caddy - 2 Piece Caddy. 40" between rear wheel holders. 50" outside width. $50 Scissor Stand and Kart Caddy Package - $80 ($20 Savings) Contact Dustin Kessinger at Email Phone: (217)352-6107 http://www.kessingerkarting.com

  • (8-20) SMC axle clutch w/ extra weights $600.00 will be at Putnam, Ed Blake 614-868-8868 days 614-471-6967 eve Email

  • (7-30) ICC 125 shifter package 2001 Top Kart with fresh TM K9 and Mychron very strong and clean, road raced only. $3900 248-613-5839 Jeff Brown

  • (7-30) 125cc Shifter 2001 Tony roller $800 248-613-5839 Jeff Brown

  • (7-28) SMC Gold anodized axle clutch with 3 sets of weights for a 1-1/4 axle. $800.00 or best offer. Ed Blake 614-471-6967

  • (7-14) For Sale: ICC TopKart/CRS complete package. In excellent condition was bought new in 2002. Alfano plus numerous spares including wheels, tires, gears, pipe, jets, gaskets, etc. Enclosed 5 X 8 Pace Trailer (as new) also available if required. Everything you need to go racing tomorrow. Sensible offers considered. Contact Bruce Crawley1-248-446-0459

  • (7-8) 2-Hemingway 257 Rotax Engines "WKA Legal"
    #1 Series 6 8hrs. from new. #2 Series 4 Updated to series 6 spec. 6 hrs. from rebuild. 1-Hemingway Modified 257 cylinder (Never Used). 1-Aprillra/Dellorto 39mm carb with powerjet adjuster and assorted jets and carb parts. 1-Clocktower Pipe with Carbon/ Kevlar Silencer and all mounts. 2-Wiseco Piston Kits with upper rod bearing (Cryoed). 2-Clutch Kits (friction discs, plates and springs). 3-Mikuni Fuel Pumps. 1-Rod Kit. 7-Spark Plugs (Denso W31ES-ZU). 5-Engine Gears 26,27,28,29,30. 3-Axle Gears "35mm" 23,25,27. 1-Engine Mount "257" for Anderson/MSR. 1-Scirocco Radiator with AN bungs and Upper & Lower Braided Stainless hoses with AN fittings. 3-428 Chain, D.I.D. & Regina. Misc. Gaskets, O-rings and Seals. Every thing you need to bolt on to a I.C./E. kart and go racing !!! Selling as a package. First $5200.00 takes all! Going 250 twin.
    Contact: Frank Dawley Phone- 1-248-583-2814

  • (7-2) For sale: Top Kart 125cc Shifter, Top Kart Jek 32mm chassis, TM KV95 rotary valve engine, Dellorto carb, Bought new in 2001, Raced 8 times in Mid States Series, Very fast package, Unused since - chassis straight, engine in great shape, Asking $3000 or best, Comes with stand, bead breaker, transponder, jets etc. Call 586 722 3422 or Email

  • (6-22) 3 Karts that I would like to sell. 1997 Beriel torsion kart + 100 Yamaha 1700.00. 1996 Beriel kart + 100 Yamaha 1600.00. 1997 125 Yamaha shifter kart 2200.00. Lots of spare parts and extras. New top ends on all 3 karts. Please call with any questions. Thanks, Thomas Mahoney, ezCAM Inc. 734-516-3311

  • (6-17) 2002 Trackmagic Dragon chassis with Brembo brakes, Douglas rims, Tillet (L) 1/4 padded seat. Fully adjustable chassis with removable rails included. 40MM Axle. Rotax Max 125cc Liquid cooled electric start ready to race. Motor has zero hours, with the Rotax seal from SSC ready for break-in. RPT tach/temp. $3800 buys the race ready package. Kart is located in Chesaning MI and can be delivered in Michigan, or various road race events through the mid-west. Contact: Dennis Chappell 989-845-2353 or Eric Chappell 269-217-5791

  • (6-17) YAMAHA KT100 - Just rebuilt with new piston, ring, seals, bearings. These are built by Kyle Adkins and consistently place in the top 5 in the WKA Manufacturers Cup. These have superior cyclinders that have been hand picked. The only reason I am selling these is because my son is now racing ICA. Don't miss out on an opportunity to purchase a new Yamaha motor, with some of the best cylinders you will find. All Yamaha Cylinders are not the same!!! $1,200 each or Best Reasonable Offer. John Wehrheim Email or 770-330-8607

  • (6-17) 2002 Biesse/Pavesi Shifter Chassis and Motor. Will sell separate or as a package. Both have only been used only 5 times in the SCCA/WKA Constructors Cup. Like New. Features include: 1. 32mm frame 2. 50mm axle 3. Removeable Front Bar 4. Removeble Side Bar 5. Removeable Rear Bar 6. Rear Ride Height Adjustment 7. Front Ride Height Adjustment 8. Independent Camber and Caster Adjustment. Pills can be added to the top and bottom king pins. 9. Champion Radiator All for $5,200. This is a savings of $2,000. Will consider reasonable offers John Wehrheim Email or 770-330-8607

  • (6-9) Looking to buy a kart package. Preferably a 2-5 yr. old chassis Sprint, 100cc motor and extras to start karting. If anyone is looking to sell ,please Email me back .I'm located in southeastern MI, willing to travel a few hours for the right stuff. Thank You

  • (6-5) Wanted: Used TM K9 ICC package. No "Fastest on the planet" motors please. E-mail with info. Thanks. Randolph Ferguson

  • (6-2) For Sale - CKS Enduro chassis, brand new never assembled. Complete roller with tanks, seat, rear Enginetics, etc. $1000 Call Mark Weaver at 810.257.5534

  • (5-15) 2001 SKM\CR125 Shifter Kart - $3900 Or Best Offer -
    Just two seasons of use (16 races), SKUSA Great Lakes region G1 class. Super clean, well sorted, well maintained, never seized, bent or crashed, zero dnfs. *** See www.aiellonet.com for pictures ***-Banke built Honda 2000 CR125 Engine-NEW bodywork-RCE Exhaust Pipe (ceramic coated for low maintenance)-Adjustable rear torsion bar-Large capacity SKM curved radiator-38.5 mm Keihin PWM Carburetor-Tillet Med-Large Full Padded Seat -PSR Turnbuckle engine mount(makes chain adjusting VERY easy and consistent - cost $265 new)
    Frank Aiello, 734-394-1245, Canton, MI, Email (219) 879-3964

  • (3-11) WANTED: Goodyear bluestreak slicks. Looking for Goodyear blue streak slicks to fit 6" wheels. Any help finding some will be greatly appreciated. Geoff

  • (3-11) 1997 Birel 125 shifter chasis with Stallion Bodywork, 1993 Honda CR/125cc Motor with Mikuni Carb Stallion Body work, Pitts Race Seat, full belly pan. Lots of extras: New mounted Rain Tires, Tire Brake Extra tires, muffler, brake pads, 3 Brand New pistons, rings, and gasket kits, Road Gears, carb jets, Streeter Kart Stand. Must Sell $2700 Email

  • (3-9) For Sale - 1999 Trick SC kart with two Yamaha KT100 motors. Complete race ready sprint/enduro package with spares. The motor on the kart is a blueprinted new style Yamaha with 5 races since last being freshened. Second motor is a blueprinted old style motor with 2 races since last freshened. Kart is equipped with all the goodies, wet cassettes, deluxe steering wheel, pedal grips, full body work (like new), pipe and can setups, etc. Chassis has less than 15 races on it since new. This is an extremely clean package with spares, $1700 plus shipping. Call or email for more info. and/or pictures.Email

  • (3-7) '99 TonyKart Extreme COMPLETE w/Trailer: 1999 Tonykart Extreme chassis with very strong, balanced & blueprinted 1999 125cc Kawasaki KX125 engine. Raced 7 times. 1999 midwest champion kart. Freshly rebuilt engine. Includes everything you need to go racing except a helmet! Many spare parts, kart stand, tires, wheels, gears, racing suit, rib protector, and small enclosed trailer (approx 6' by 8'-big enough for everything and small enough to tow behind a car). Great way to start karting or move up to shifter class in a quick kart. Call or email for more details. Asking $4,400 for entire package or make an offer. 734-507-0863, Email

  • (3-3) 1994 Invader KA027 sit-up enduro kart, 2 Kean built Yamahas (1 fresh), Horstman axle clutch, MCP "Big Red" front and rear brakes, tach/temp gauge, full body work (Stallion nose), belt drive/extra sprockets, extra set Van-K wheels, starter and tools, electric kart lift, ALL new bearings in 1999, raced once in 99 has been stored since, includes 4X8 home built trailer, this is a complete ready to go package all you will need is new tires and personal safety equipment. Asking $3,000.00 OBO call Mike, W- 313/299-5333, H-810/748-8874 or Email

  • (2-23) 2001 Shifter Kart for sale. Top Kart Jek with TM KV95 motor. Only used for 8 races in '01, unused since. Very quick kart. Comes with stand, transponder and tire bead breaker. Call 586 739 8182 or Email for more info / pictures. Price is $3500 or best offer.

  • (2-5) 2002 Mid-States Super Series Class Champion 2001 V-Tek Enduro
    Features: LAD Prepared Yamaha Fast and Dependable, SMC Axle Clutch, Douglas 1 pc. Wheels, 14-16 Nose gears, 73-78 Axle gears, Margay Enduro Seat, Margay 12 deg. spindels, V-Tek Uni-mount system, Digitron DT-32 Gauge, RPM Bodywork, Adjustable Rear ride height w/wet cassettes, Kart comes with what is listed gas and go.
    contact Kenny Lawson at 1-586-360-6159 3000.00 and worth every dollar

  • (2-3) Enginetics Front Wheel Brakes for enduro - 2 calipers (Yellow - 6000), 2 disks and hubs, 3 sets of new pads (red, blue and black). $170. Contact Craig at Email Columbus Ohio

  • (1-31) FOR SALE Good deal at twice the price. 2001 Shifter Interkart 125 Chassis $1200. Virtually brand new, only practice time on chassis. All you need is a motor, new 5" Dunlops, 4 wheel Brembo brakes, 40 mm axle, medium Caliba seat, brake bias adjuster, stainless brake lines, CIK homologation stamp, Magnesium wheels, front torsion bar and the ability to install a rear torsion bar if needed, 32mm chassis. THIS THING IS VIRTUALLY BRAND NEW. I have pics. Buyer must pickup kart in Plano, TX
    evening phone 972-517-6395, Email SERIOUS ENQUIRIES ONLY

  • (1-31) 98 Renspeed with 2000 TM engine. Engine built by Art works, race ready very fast to many extras to mention. call for more info. 702-564-1063

  • (1-28) One of 4, of Scott Speed's 01 Tony Mitox with widened front end mods by JM racing, w/ honda JM/08/00 porting barrel(40hp on JM's Dyno) O-ring/copper gasket head. Fresh top & bottom ends 10 minutes top end break in only. Many Spares. Call for list. 760-559-0158 Going oval racing $4,500.00

  • (1-28) WANTED:

    Horstman or SMC Sprint Axle Clutch for 1" axle. Contact Craig at Email or 248-348-2487

  • (1-28) 2000 Renspeed 125 shifter Kart. Bought new in December 2000. Raced 4 times on dirt and not used at all in 2002. Paid $8000, asking $5000 or best offer. Includes slicks, dirt tires, neck support, stand. Yamaha 125 motor. Thing flies! To fast for dirt. Call 810-614-1593 or email for pics.

  • (1-20) For sale 1990 Honda Hawk 1990 647 GT. Red, 8500 miles, stage 1 jet kit, 2 brothers exhaust (aluminum canister) great condition a must see for any motorcycle, never raced however it is a very popular racing bike. Asking $3300 or will trade for a 125 shifter kart (birel, tony kart, crg, margay or comparable) in great condition.
    E-mail me for photos or inquiries at Email

  • (1-13) For Sale - 1997 Olimpic "Gambler" offset with fresh new style blueprinted Yamaha. Motor and clutch have two races on them since being completely gone thru. Kart is in excellent shape and has been well maintained. Many spares with the package including a second Yamaha motor. $1,600 Call or email for more info. and/or pictures.
    Email
    (616) 554-6802 Days,(616) 636-5210 Eves

  • Please Send Yours In

    MKC Home