The Mailbox Garden
So easy to install
Tools Required to Install:
Pencil, 1/16 inch drill or a 1/16 inch punch ( a small nail ), Phillips head screw driver.
Installation Instructions:
Center the planter along the side of the mailbox, deck, or window.
Press in and up to ensure a tight fit. While applying pressure, mark the five pre-drilled screw locations with a pencil.
Remove the planter and drill or punch the screw locations to a depth of 1/2 inch.
Replace the planter and align the pre-drilled holes in the planter with the ones you created.
Using a Phillips head screw driver, attach the planter to your mailbox, deck, etc with the screws provided.
Make sure the screws are snug and the planter is secure.
Open the drain holes on the planter.
The MailBox Garden can be used with pre-potted plants or plants may planted directly into the planter.
