Remote Control Helicopter Points To Hover
So you have just purchased your brand spanking new
RC helicopters Australiaand are going to take it on its first voyage. Now, like anyone else you would like to be able to fly your heli in a stable fashion without crashing. In case you are completely new to flying a remote control helicopter, this will take lots of work and it is vital that you master one skill specifically - hovering. Once you can make your helicopter hover, you can control it better and consequently fly it better and stay away from crashing it. In the following article we will look at a few tips which will help you when learning to hover.
As soon as your RC helicopter has been setup based on the instruction manual, connect the training gear if you have and stand behind the helicopter for about five meters. Standing behind is a lot better than to stand in front to avert disorientation.
Tip 1 - Begin With Hopping
Once you are ready, push the throttle stick steadily forward and the motor will start winding and the rotors will start spinning. Now while you keep pressing it, as it gets halfway forward your helicopter will start to leave the ground. Use these first mini-flights as an opportunity to acquire a feel for your helicopter. Just try getting it off the ground a bit and trying to fix any sway it has, for instance if it veers to the right, shift it to the left and vice versa. It doesn't matter if you land farther away from the place you took off, you are simply practising controlling the thing. Once you can keep it within a 2 meter radius of where you took off, you are now all set to move on.
Tip 2 - Try Managing Tail In Hover
Try and keep your remote control helicopters Australia in a single place. If you wish to hover you should correct the positioning like before however try to get to where you hover then return down in the similar place. Try to keep it that way until you do it perfectly.
Tip 3 - Start Moving The Helicopter Around
Because you are now able to hover it, time to keep moving. This is when the excitement actually begins. Once you have already your selected spot to fly and land your helicopter, rather than simply hovering, nudge your directional control stick in the direction of your landing spot. What you need is a little, light nudge then you can now leave the control alone, and when it moves on the proper direction, you may now start moving the control stick on the reverse direction to land the helicopter slowly. When it slowed, it now safe to lower the RC helicopter onto the landing place. Keep on practice this until you can confidently take off, fly and land your RC helicopter in another spot.
There are much more to discover but consider the tips given above to have the liberty to hover and control your remote control helicopter as well as avoid it from crashing.