Saw Trax Manufacturing, Inc
The Best Tools for Cutting Corrugated Plastic, Vinyl, and Film
With ergonomics, precision and safety in mind, we've built the perfect hand tools for cutting stiff plastic signs, posters, pictures, sheets and many other like materials. Cut your Coroplast sheets into small pieces, crop pictures and even bend Coroplast into angles and shapes!
Saw Trax Mfg., Inc. was founded in 1988 by a Naval Aviator, Michael Della Polla, who was not satisfied with the design of cutting guides used by circular saws at the time. Saw Trax started making panel saw kits in 1992. In 1996, Saw Trax came out with their first panel saw and the company has been improving their panel saw design ever since. Now the machine is a not just a panel saw but a glass cutter, mat cutter, aluminum cutter and panel router.
Saw Trax Manufacturing, Inc. is located in Kennesaw, Georgia, USA. All equipment is manufactured and shipped from this location. Our products are always evolving with the needs of our users.
We offer several cutting solutions for our customer base. From specialized hand cutting tools, table top cutting tools, saw kits to our most popular product, vertical panel saws. Versatility is the key to our success. With our new line up of sheet carts, like the Panel Express, Dolly Max, yel-Low dolly and Scoop Dolly, Saw Trax continues to think outside of the box with innovations not seen in the material handling market place.
Truly the best saws in their class, our vertical panel saws feature a steel bearing system and patented alignments Accu- Square alignment systems. In addition to the standard circular saw our panel saws have a unique carriage that allows the use of different cutting tools. We also offer a floating router insert, a razor knife insert, a rolling sheer insert and a floating saw insert. One machine can cut almost all sheet goods with the proper cutting insert!
For the Sign industry we offer our uniquely designed Coro-Claws and Biddi Knife. The Coro-Claw hand held cutter is designed to cut along the flutes of corrugated plastic materials. The Coro-Claw Deluxe cuts 4 mil coro and the Coro-Claw X cuts 10 mil coro. We also offer a safety vinyl & banner material cutter that we have branded as the Biddi-Knife. (This is short for Bi-Directional safety knife.) These are just a few of the products in addition to our most popular panel saw & mat cutter combo panel saw.
We offer superior customer service and our friendly staff is very knowledgably and experienced as to how our machines operate and perform when cutting various material.
From the garage shop, to the industrial production plant, to sign shops our machines have the right size frame and saw type to cut all of your substrates from plywood, plastics, PVC, aluminum, aluminum composites, MDO, MDF, Melamine, Veneer plywood, and so on.
Your time is money. Our goal is to make your cutting jobs easier and you more productive. We design our sheet cutters from the user’s perspective; “What would I want if I were buying this?” That is why we are the fastest growing panel Saw Trax Manufacturing, Inc company!
Address:
3694 Kennesaw S Ind Dr, Suite A
Kennesaw, GA 30144
Phone: 770-974-0021
Manufacturer
Office hours:
Monday: - 8:30AM-5PM
Tuesday: - 8:30AM-5PM
Wednesday: - 8:30AM-5PM
Thursday: - 8:30AM-5PM
Friday: - 8:30AM-5PM
Saturday: - Closed
Sunday: - Closed
Email: info@sawtrax.com
Lat: 34.0437855
LONG: -84.61479700000001
More visit us links:
https://www.facebook.com/SawTrax/
https://www.linkedin.com/company/saw-trax-mfg-co-inc/
https://www.youtube.com/user/SawTraxMfg
https://twitter.com/search?q=SawTrax_
The Best Tools for Cutting Corrugated Plastic, Vinyl, and Film
With ergonomics, precision and safety in mind, we've built the perfect hand tools for cutting stiff plastic signs, posters, pictures, sheets and many other like materials. Cut your Coroplast sheets into small pieces, crop pictures and even bend Coroplast into angles and shapes!
Saw Trax Mfg., Inc. was founded in 1988 by a Naval Aviator, Michael Della Polla, who was not satisfied with the design of cutting guides used by circular saws at the time. Saw Trax started making panel saw kits in 1992. In 1996, Saw Trax came out with their first panel saw and the company has been improving their panel saw design ever since. Now the machine is a not just a panel saw but a glass cutter, mat cutter, aluminum cutter and panel router.
Saw Trax Manufacturing, Inc. is located in Kennesaw, Georgia, USA. All equipment is manufactured and shipped from this location. Our products are always evolving with the needs of our users.
We offer several cutting solutions for our customer base. From specialized hand cutting tools, table top cutting tools, saw kits to our most popular product, vertical panel saws. Versatility is the key to our success. With our new line up of sheet carts, like the Panel Express, Dolly Max, yel-Low dolly and Scoop Dolly, Saw Trax continues to think outside of the box with innovations not seen in the material handling market place.
Truly the best saws in their class, our vertical panel saws feature a steel bearing system and patented alignments Accu- Square alignment systems. In addition to the standard circular saw our panel saws have a unique carriage that allows the use of different cutting tools. We also offer a floating router insert, a razor knife insert, a rolling sheer insert and a floating saw insert. One machine can cut almost all sheet goods with the proper cutting insert!
For the Sign industry we offer our uniquely designed Coro-Claws and Biddi Knife. The Coro-Claw hand held cutter is designed to cut along the flutes of corrugated plastic materials. The Coro-Claw Deluxe cuts 4 mil coro and the Coro-Claw X cuts 10 mil coro. We also offer a safety vinyl & banner material cutter that we have branded as the Biddi-Knife. (This is short for Bi-Directional safety knife.) These are just a few of the products in addition to our most popular panel saw & mat cutter combo panel saw.
We offer superior customer service and our friendly staff is very knowledgably and experienced as to how our machines operate and perform when cutting various material.
From the garage shop, to the industrial production plant, to sign shops our machines have the right size frame and saw type to cut all of your substrates from plywood, plastics, PVC, aluminum, aluminum composites, MDO, MDF, Melamine, Veneer plywood, and so on.
Your time is money. Our goal is to make your cutting jobs easier and you more productive. We design our sheet cutters from the user’s perspective; “What would I want if I were buying this?” That is why we are the fastest growing panel Saw Trax Manufacturing, Inc company!
Address:
3694 Kennesaw S Ind Dr, Suite A
Kennesaw, GA 30144
Phone: 770-974-0021
Manufacturer
Office hours:
Monday: - 8:30AM-5PM
Tuesday: - 8:30AM-5PM
Wednesday: - 8:30AM-5PM
Thursday: - 8:30AM-5PM
Friday: - 8:30AM-5PM
Saturday: - Closed
Sunday: - Closed
Email: info@sawtrax.com
Lat: 34.0437855
LONG: -84.61479700000001
More visit us links:
https://www.facebook.com/SawTrax/
https://www.linkedin.com/company/saw-trax-mfg-co-inc/
https://www.youtube.com/user/SawTraxMfg
https://twitter.com/search?q=SawTrax_