Bluetooth scan tool - Introduction Tech 301050116 ‘CRP123′ ABDOMINAL MUSCLES, SRS, Indication in addition to Powerplant Program code Reader Assessment
Launch Tech 301050116 ‘CRP123′ ABS, SRS, Transmission and Engine Code Scanner Review
I must admit from the onset that none of the OBD2 scan tools I have encountered had this much aesthetic taste. Looking at the Launch Tech 301050116 ‘CRP123 -Transmission and Engine Code Scanner one admits the amount of effort that must have gone into making it.
The temptation will be to go through the profile of the manufacturer- the launch technologies which admittedly have not been so much of a household name where OBD scan toolmaking is concerned. If colors would be the yardstick for measuring the manner in which the tool would work, this tool takes position one hands down.
The features
It is however the features of the Launch Tech 301050116 ‘CRP123′ -Transmission and Engine Code Scanner OBD scan tool that attracted me and as I know many other buyers to this tool. Some of the features are highlighted vas below;
• Wide compatibility- with the coverage of diverse OBD 2 protocols in the auto industry, you are sure to get the best of the on board diagnostic service. Moreover, the OBD 2 scan tool is known to exhibit what is rare in most tools known as the OBD II mode 6 which is a form of diagnostics with more superior features.
• Data-the OBD tool gives live data as well as freeze data which allows the user to have both on time as well as later usage of data. These two features allow the use to enjoy stress free life in as much as data access is concerned.
• Wider protocol compatibility and code reading- the tool has some of the widest data coding capacities which are known to encompass the manufacturer specific as well as generic codes. In this regard, the tool is known to be widely compatible as well with the coverage of domestic us made motor vehicles as well as diverse range of other vehicles from Asia and Europe.
• It has an enhanced display-with several features for its display, the Launch Tech 301050116 ‘CRP123- transmission and Engine Code Scanners are known to be able to display efficiently the different data found in the motor vehicle engine system. For instance it can display the data from the anti brake lock system (ABS) and the safety restraint system (SRS) which are all safety features. In addition, the scan tool has an illumination light I/ML feature to inform the driver if there is any fault with the engine.
• It is small in size-at only 1.4 pounds and measuring only 9.2 by 7.8 by 1.7 inches, this tool has all it takes to carry and keep without having to put any pressure on the user.
• A befitting design- the OBD scan tool wins all the accolades online in terms of which tool is eye catching, its plastic cover is made into an attractive casing which is strong to protect from breakage.
Benefits
With all the unique features, the OBD scan tool presents the user with a bag full of goodies. Some of which include;
• Durability- the manufacturer of the scan tool has very clear focus in terms of making a lasting impression on the user. This is seen in the manner in which the machine is made with a strong plastic casing making it to stay strong and sturdy.
• Beauty- make any mistake of taking the OBD 2 to any beauty contest and the scanner will win it hands down based on its ability to create an eye catching impression on its users.
Recommendations
Look at this tool closely and you will agree that this tool fits the bill when it comes to overall looks. However, though it may be good for you, take time to use it to decide whether it is what you needed. Looks are not everything and this is unlike the fact that there are many OBD 2 scan tools which perform the same functions may take a dip into your finances. Why not shop around d before making the ultimate decision. But if you are capable, go for it, it is worth your professional expertise.
The OBD 2 scan tool does not use any software that has to be run. it is however connected to the car through the usual DLC port which in the past used to be located on the dashboard but is now found just on the lower area on the driver’s seat. The 16 pin connector will definitely be handy to start the all important process of scanning with a touch of the scan tool buttons.
Conclusion
The advent of the scanners is definitely going to lead us into more. With this tool, even if you are in Europe, you don’t need to worry because it is highly compliant with the rules regarding the regulation of petrol and diesel cars.
Though it may seem beyond reach to the common person, having it may be the difference between keeping yourself sane on the road and just going to the dogs! So let buy a Launch Tech 301050116 ‘CRP123′ ABS, SRS, Transmission and Engine Code Scanner to fix your car
Review Summary:
Launch Tech 301050116 'CRP123' is product of Launch Tech, it can check ABS, SRS, Transmission and Engine Code, so if you have ideas to buy it, read my reviews about this.
Incoming search terms:
• code scanner tool for abs and transmission
• 301050116 LAUNCH SCANNER
The OBD user assumptions, the red lights to look for
While the OBD scan tool is quite an important tool to have within your car, there seems to be an over indulgence on their importance. This has even made most users have the misconception that the OBD scan tool is a know it all tool. Far from it, the OBD scan tool covers so much within your car engine but it still has certain points to look for in case you develop a problem with your car.
Some of these areas may help you in expeditiously solving issues arising from your car showing the malfunction indicator light which in most cases can be persistent. They include;
• Over-relying on the data-studies has shown wide gaps in the OBD data availability especially if the fault may have been caused by some gas issues. For instance, there could be a malfunction indicator light even after the coding process is complete. This usually presents a big challenge yet the problem could just be that some area within the gas tank is not fully closed.
• Not conducting OBD periodic inspections- the benefits accrued by conducting inspections at intervals involving several drive circles has been emphasizes. While most drivers think that the scan process should be continuous, it is beneficial to allow the scanner pick enough data for you to act on. The periodic inspection also helps the driver be kept abreast with the going on within his car and thus avert any cases of engine breakdowns which may also result into spiraling costs of repair.
• Avoiding visiting the mechanic- it is clear that in most scenarios, there are likelihoods that the driver may intend to cut on the overall costs of repair and so jump the process of seeking professional advice. This should not be the case. The mechanic still play an important role in helping detect certain faults that may be appearing on the OBD scan tool data display and not known to a non professional.
It is additionally clear that there are likely other car issues which are not related to the gas situation of the engine. These scenarios are not likely to be detected by the OBD scan tool system which requires professional help.
• Think of other automotive car effects-the presence of other additional failures not likely seen on the OBD scan tool is also another challenge which calls for visiting of someone qualified. For instance, it is not entirely final that all environmental issues will be sorted out with the presence of an OBD scan tool. Take the case of the usual OBD 4gas analysis which only identifies the emissions of CO2 and potassium. Environmental experts on car use may be of help here.
• Cost assumptions- while the debate on the use of the OBD scan tool continues, cost remains one of its strengths. The pundits claim that it is the most cost effective method of conserving the environment as well as courting down on the car user cost.
The disparities which have been proven in different studies conducted in Germany and Britain have however proven this to be only true to some extent. While the Germans experience zero cost reduction with the use of an OBD scan tool, the Britons were noted to benefit a lot from the use of OBD scan tool. These factors could be attributed to the fact that the several diverse user policies adopted in different countries influence how much the OBD use will cost.
The OBD scan tool assumptions and theories will be important if the countries are to develop comprehensive user policies which may help determine the user scope and environmental policies. More input may still be needed from the stakeholders.
PLX Devices Kiwi Bluetooth Wireless Trip Computer and OBD II Scanner Reviews
Are you one of those who are looking for an OBD scanner of great quality? Your search seems to end with the discovery of the PLX Devices Kiwi Bluetooth Wireless Trip Computer and OBD II Scanner.
Looking at the scan, one can definitely see how much time it took the innovators. However, it is the amount of praise which its users have always had for it that has drawn it into being seen as among the best.
The kiwi brand does not disappoint both in function and design. Though relatively a new entrant into the OBD scan tool making business, the PLX devices have always distinguished itself as one of the most innovative OBD scan tool manufacturers.
In fact, this will be like blowing their trumpet before looking at the uniqueness of the PLX Devices Kiwi Bluetooth Wireless Trip Computer and OBD II Scanner, which is well seen on its features.
Features
The OBD scan tool has some of the following features including;
• With the several USB cables which are inclusive in its nice package, the tool has the ability to connect to the cars OBD ii connection port through its 6 feet cable. The addition of a power switch helps the process further by making it a standalone device; it makes the coding process quite easy and convenient.
• PLX Devices Kiwi Bluetooth Wireless Trip Computer and OBD II Scanner has a wide coding capacity with vehicles within the OBD II. In addition, its work with the android application range of Torque Free, OBD Scan Gen Pro, OBD Android-Pro, OBD Android-Free and the Voyager Dash makes it quite fast.
• It has the ability to scan based on the several OBD engine sensors that it has and the wireless connectivity function based on the plug and play enabled features are all too familiar.
• In addition to the read, erase, display, translate and store data codes make it stand out.
• The OBD is further enabled with the manufacturer’s fuel’ gauge in the form of miles per gallon (MPG) sensors which make it give an in-depth state of the fuel situation. This helps the user get a clear preview of when to fuel the car.
• It has the capacity within its system to give the user real time data coding and viewing through its s well formed display screen.
• It has a small size of 2.75 inches by 1.25 by 0.6 inches which makes it so easy to carry around during use. In addition it weighs 6.4 ounces which is also so light for ease of movement.
• It has the capacity to connect to all android enabled mobile devices through its Bluetooth function. This allows it to be able to connect to almost all the OBD II compliant cars with Bluetooth function.
Benefits
The PLX devices are known to come with several benefits in its use. Some of which include;
• Ease of use- the 6 feet USB cable which accompanies the OBD scanner makes its connection quite easy. In addition, the installation of the OBD scanner is easy and takes less than 10 minutes.
• Convenience- it is not surprising that the scan tool has the ability to bring several codes including the fuel gauge. Using this tool allows for the user to be able to help the user avoid diverse cases of car engine fault.
Why I can recommend it?
I have been blessed with the grace of using several OBD scanners but this one is special. Its mode of operation is unique added to the several enabling features which make the tool stand out. It is a recommended tool for both professional mechanics who want convenience for their clients and beginners.
Because it has the ability to give code meanings, you are bound to experience immense decrease in your mechanic visits. It is also likely that this OBD scan will help improve the state of your engine fuel consumption.
Because of the nature of its compatibility, it is only nice if one got an OBD 2 device. The next step will be probably to download the requisite applications which the scanner works with on Bluetooth.
These can be either one of the following android applications; Torque Free, OBD Scan Gen Pro, OBD Android-Pro, OBD Android-Free and Voyager Dash. These applications can be sourced for from the open sources for a fee.
Running the applications and opening the application on your mobile will make the user ready to pair the device for use. It is imperative that the device b e paired or connected to the engine port directly for the scan process to begin.
On receiving the code, the owner can decide to repair on his own or just take it to the mechanic for repairs.
Conclusion
If you take a close look, you are likely to see the PLX Devices Kiwi Bluetooth Wireless Trip Computer and OBD II Scanner is just your ordinary scanner. However, its operations will make you more excited than you think. There are likely some OBD 2 scan tools in the market that works almost like it, some are even better.
Information on these tools may be what makes the difference. Visiting our site could therefore serve as that ice breaker. This does not mean you have to buy this tool, but it will serve your needs if you did so.
Review Summary:
PLX devices kiwi is the good OBD2 scan tool which has over 160 reviews
Incoming search terms:
• kiwi obd
obd2 scanner with abs - obd2 scanners for sale