[boot]
.
.
.
.
; orginal setup is comm.drv
comm.drv=cybercom.drv
.
; orginal setup is system.drv
system.drv=syshook.drv

[keyboard]

[boot.description]
aspect=100,96,96
displayinf=OEM0.INF
display.drv=VGA  800x600/256 Small Font (512KB)
.
.
.
mouse.drv=Microsoft, or IBM PS/2
system.drv=MS-DOS System
.
; filemanager will auto-update if this is on
; wastes CPU cycles so I keep it off
FileSysChange=off
.
; was .002 (too fast for me)
KeyBoostTime=0.1


[standard]
.
; I never use the standard mode and
; don't recall what this even does
; but was a recommended tweak?
; orignally is =10
Int28Filter=30


[386Enh]
.
; not sure if this is standard
; or I added this?
SysVMIn2ndBank=FALSE

.
; Supposed to give Windows the video
; memory used for B&W monitors, some
; video adapters use this space so it's
; not a tweak for all systems to use.
; there is also a monoumb2.386 if this
; one doesn't work properly.  Haven't
; tried it yet but monumb2 seems to be for WFWG.
device=monoumb.386

; These I'm not sure of either.
; It seems this should be off but
; I run with it on?
DualDisplay=on
VGAMonoText=off

.
; Faster exit to DOS if it
; doens't check for
; re-intitializing the mouse
InitPS2MouseAtExit=False
.
; Leftover from 4 meg setup
EMMSIZE=0
NoEMMDriver=ON
.
; Users can change multiplier for
; swapfile calculations done by the
; control panel.  I had a larger
; number here for awhile, seemed
; to make no real difference since
; W31 is programmed to never use
; more than 1/2 the free drive space
; anyhow.  default=4
PageOverCommit=4
.
; This is for dosbox
LocalLoadHigh=off
.
; syshook.drv (above) uses this
; as reserved memory, will warn
; when you get low on memory to
; help avoid lockups.
lowreservoir=200
.
; I never use any cache or fancy
; functions for floppy drives
; seems always a disappointment
; so why waste resources?
HighFloppyReads=NO
VCPIWarning=true
.
; Original setup had an EISA slot
; motherboard and ESDI drive
;EISADMA=0,8; 1,8; 2,8; 3,8; 4,16w; 5,16w; 6,16w; 7,16w
SyncTime=True
TrapTimerPorts=off
.
; I think I added these when
; recommended on a tweaks
; website?
HardDiskDMABuffer=64
DMAbuffersize=64
DMABufferIn1MB=on
.
; This is mentioned by
; Microsoft as a tweak.
; Default=768
MaxBPs=1000
WindowUpdateTime=5
.
; default=off
VirtualHDdIrq=on
.
; default=20
pagebuffers=32
.
; This was ON when I had a 32 bit
; access compatible drv and controller
32BitDiskAccess=off
.
A20EnableCount=on
AutoRestoreScreen=on
device=*int13
.
; wdctrl is the device
; that checks for 32 bit
; access compatible
; drive and controller
device=*wdctrl
device=wdcdrv.386
device=vtdapi.386
device=*pagefile
device=*blockdev
;
SystemROMBreakPoint=false

COM1BASE=03F8
COM2BASE=2F8h
COM3BASE=3E8h
COM4BASE=02E8

.
; These are 4,3,4,3
; but only have com1
; and modem is com4 now
Com1Irq=4
Com2Irq=-1
Com3Irq=-1
Com4Irq=3
;
COMIrqSharing=False
.
; This setting may or may not
; be significant for telecom?
COMBoostTime=10

.
; Com1 is mouse
; Com4 is modem
COM1Buffer=128
COM2Buffer=
COM3Buffer=
COM4Buffer=2048
.
; Think I added these
Int28Critical=FALSE
UniqueDOSPSP=TRUE

ebios=*ebios
keyboard=*vkd
;
device=*vpicd
device=*vtd
device=*reboot
device=*vdmad
device=*vsd
device=*v86mmgr
device=*pageswap
device=*dosmgr
device=*vmpoll
device=*wshell
device=*vfd
device=*parity
device=*biosxlat
device=*vcd
device=*vmcpd
device=*combuff
device=*cdpscsi
;
local=CON
.
; These control the use
; of CPU cycles and are very
; important for multitasking
FileSysChange=0
MinTimeslice=10
WinTimeslice=150,50
WinExclusive=0

.
; Tells Windows to use the
; UART FIFO buffers
COM1FIFO=1
COM2FIFO=1
COM3FIFO=1
COM4FIFO=1

.
; Allows 4 cycles to read
; the mouse
Com1AutoAssign=4
Com2AutoAssign=
Com3AutoAssign=
.
; Allows 30 cycles to read the
; modem UART buffer
Com4AutoAssign=30
.
; No printer attached now
; but had this set to
; 60 when I did have one
; LPT1AutoAssign=60
LPT1AutoAssign=
AllVMsExclusive=0
DOSPromptExitInstruc=1
LocalReboot=0

.
; Added this recently
MinPagingFileSize=6040
PermSwapDOSDrive=G
PermSwapSizeK=50053

[NonWindowsApp]
SwapDisk=G:\
CommandEnvSize=1024
localtsrs=dosedit,ced
MouseInDosBox=1

[mci]

[drivers]
.
; Still using the speaker driver
; on this setup :-\
Wave=speaker.drv

[speaker.drv]
CPU Speed=72
Volume=100
Version=774
Enhanced=1
Max seconds=0
.
; Sound not allowed to multitask
; with other apps
Leave interrupts enabled=0

[vcache]
.
; Not sure this even works for
; normal W3.x - I think it's only
; for WFWG?
MinFileCache=1024
MaxFileCache=2048
ChunkSize=512

[MPU401.DRV]

[svga256.drv]

[display.drv]