Site hosted by Build your free website today!

Hi Michael,

Here are some details with regards to the setup:

The files are labeled from "drum chair" perspective not "audience" perspective - flip the whole works if you want audience. Overheads pan to the side corresponding to their label, and then the Toms fit underneath nicely as follows:

Tom 1 = 80% Left

Tom 2 = 50% Left

Tom 3 = 50% Right

Tom 4 = 100% Right

Hi Hat = 50% Left

A couple of the tracks use the "gong bass drum" which is basically a large, super low floor tom that resides at 100% left on the kit

You can change the placement a bit under the overheads, but you may run into some phasing issues if you take things to far from where they reside on the actual kit. Speaking of phasing - you will need to flip the phase on the raw version of the snare bottom mic if you chose to use it. It provides a bit more of the snare crackle - I normally run it at about a 75% volume level of the main snare mic.

Happy Mixing!


Right Click and "Save Target As...":

Invictus Tambourine

Invictus Dumbek